TABLE OF CONTENTS
..............................................................
2
................................................................
3
BEFORE YOU BEGIN ......................................................................
4
..............................................................................
5
..........................................................................
11
CONSOLE OPERATION ....................................................................
14
..................................................................
22
ORDERING REPLACEMENT
PARTS ..................................................
Back Cover
..........................................................
Back Cover
Note: A PART iDENTiFiCATiON
CHART and a PART LIST/EXPLODED
DRAWING are attached in the center of
this manual, Remove the PART iDENTiFiCATiON
CHART and PART LIST/EXPLODED
DRAWING before begin-
ning assembly,
WARNING DECAL PLACEMENT
The decal shown here has been ptaced on the
eHiptica_ trainer. If the decaJ is missing
or illegi-
ble, please call toll-free
1-888-533_1333, Monday
through
Friday, 6 a.m. until 6 p.m. Mountain
Time, and order a free replacement
decal
Apply
the decal in the Jocation shown.
To prevent damage, ONLY use the high
pulley station when the seat is in the
cmosest position to the upright.
Maximum user weight is 250 _bs.
Need help?
Do you have a question about the CrossXover and is the answer not in the manual?
Questions and answers