Tuning The Tv Channels; Automatic Tuning System; Edit; Manual Channel Setting - Daewoo DTD-14D3 Instruction Manual

TUNING THE TV CHANNELS

AUTOMATIC TUNING SYSTEM

Press the menu button to select the "INSTALL"
Press the right button and then select a sound system.
Press the right button to start AUTO SETUP.
Please wait until the EDIT menu appears

EDIT

DELETE PROGRAMME POSITION DATA
Press the menu button to select the EDIT menu and move the
yellow bar to the EDIT with the up/down buttons.
Position the yellow-bar to the programme to delete with the
up/down buttons and then DELETE button.
The deleted programme is moved to the programme no.99 and
the programmes below the deleted programme no will be shifted
to the programme no lower by one.
The programme moved to no.99 will be initialized to Skip "Yes".
CHANGING THE ORDER OF THE CHANNELS
Position the yellow-bar to a programme to move with the
up/down buttons and then press the MOVE button.
Press the up/down buttons to positon the yellow-bar to another
programme to exchange.
By pressing the MOVE button again, selected two programmes
will be exchanged
ENTER A STATION NAME
Locate the cursor to below NAME with left/right buttons.
Using the up/down buttons, select the desired letter, number or
blank. Press the right button to select the next position.
SKIPPING THE CHANNELS
You can select SKIP "Yes" or "No" with the SKIP button in EDIT
mode or locate the cursor to below SKIP with the left/right buttons
and then press the up/down buttons to skip the desired programme.
A programme marked with Skip "Yes" is skipped when changing
channel using the Programme UP/DOWN.(on normal opertion)
Press the NUMBER button 0..9 or UP/DOWN buttons to select
programme number you want.
The screen will change according to the selected programme
number.

MANUAL CHANNEL SETTING

Locate a cursor to MANUAL TUNE with the up/down buttons
and then press the left/right buttons.
The tuning screen will appear and the cursor will move from left
to right or from right to left. The channel will be searched from the
band area of current programme. If you continuosely press the
left or right button over 5 seconds, the current band area is
shifted to the next band area. (VHF-L VHF-H UHF)
After searching a station, the tuning screen will disappear.
To stop searching, press the MENU button.