Oven Control, Clock And Timer Features And Settings - GE JBS05 Owner's Manual

Using the oven controls, roe s ome mode s
Throughout this manual, features and appearance may vary from your model.
GEAppliances.com
Oven Control, Clock and Timer Features and Settings
BAKE/TEMP RECALL Pad
Touch this pad to select the bake function.
BAKE Light
Flasheswhile in edit mode-you can changethe
oven temperature at this point. Glowswhen the
oven isin bakemode.
START/ON Pad
Must be touched to start any cooking or cleaning
function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or self-
cleaning mode and the times set for the timer or
automatic oven operations. The display will show
PRE while preheating. When the oven reaches the
selected temperature, the oven control will beep
and the display will show the oven temperature.
If "F- and a number or letter" flash in the display and the
oven control signals, this indicates a function error code.
If your oven was set for a timed oven operation and a
power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there has
been a power outage. Reset the clock.
If the function error code appears during the self-
cleaning cycle, check the oven door latch. The latch
handle may have been moved, even if only slightly, from
the latched position. Hake sure the latch is moved to the
right as far as it will go.
Touch the CLEAR/OFFpad. Allow the oven to cool
for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power to the
range and call for service.
KITCHEN TIMER ON/OFF or
TIMER ON/OFF pad
Touch this pad to select the timer feature.
Then touch the + and - pads to adjust the timer.
TIMER Light
Flasheswhile in edit mode-you can change the set
time at this point. Glowswhen the timer has been
activated. Flashesagain when the time has run out
until the control is reset.
CLOCKPad
To set the clock, press this pad twice and then
press the + and - pads. The time of day will flash
in the display when the oven is first turned on.
STARTTIME ON/OFF Pad (on some models)
Use along with the COOKINGTIMEON/OFF or
SELFCLEAN pads to set the oven to start and
stop automatically at a time you set.
Start Time Light
Flasheswhile in edit mode-you can change the
start time at this point. Glowswhen the function
has been activated.
COOKINGTIMEON/OFF Pad (on some models)
Touch this pad and then touch the + or - pads
to set the amount of time you want your food
to cook. The oven will shut off when the cooking
time has run out.
COOKING TIMELight
Flasheswhile in edit mode-you can change the
set time at this point. Glowswhen the function has
been activated. Flashesagain when the time has
run out until the control is reset.