Asus P7P55D PRO User Manual page 56

11. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
•
•
•
•
2-38
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
Do not forget to connect the 8-pin EATX12 V power plug; otherwise, the system will
not boot.
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability.
Coolive AP-350F
AcBel PC7030
Antec SG-850
Be quiet P6-PRO-850W
Corsair CMPSU-620HX
CWT PSH650V-D
CWT PSH750V-D
EnerMAX EGX1000EWL
EnerMAX EIN720AWT
EnerMAX ELT500AWT
FSP FSP500-60GLN
I-cuteAP-600S
OCZ OCZ1000PXS
OCZ OCZ780MXS
PSU suggested list
OCZ OCZGXS850
Seasonic SS-850EM
Seasonic SS-900HP
Seventeam ST-420BKP
Seventeam ST-522HLP
Silverstone PSU ST56ZF
Silverstone SST-ST50EF
Silverstone SST-ST85F
Snake PSH500V
Tagan TG1100-U33
Thermaltake PUREPower-600AP
Thermaltake TWV500W-AP
Thermaltake W0133RU
Zalman ZM600-HP
Chapter 2: Hardware information