Table of Contents
Advertisement
5.2.8. Using a barcode scanner for saving a barcode
Barcode support is enabled through an option in parameter 3.
When parameter 2, field 6 (corresponds to a barcode) and the necessary item
number are displayed in the submenu "parameter field and item", the key
is pressed first to select the field for entering the barcode.
If the selected item has not been programmed, "
while. The barcode has to be scanned, using the barcode scanner, connected to the
ECR. If the reading is correct "
programmed barcode can be checked by printing the item through ' .
Barcode digits can be entered manually and in this case pressing the key is
used to save the barcode.
5.2.9. Exit
The key
is used for moving one level up in the Programming mode menus,
‹
as well as for exiting the mode.
5.3. Programming mode (4)
5.3.1. Parameters
Parameter 1: Operators
This parameter includes 10 items – one item for each operator (cashier)
Field
Description
No
1
Operator name
2
Operator password
Operator personal
3
identification
number (OIB)
Note: The operator OIB is obligatory to be entered in order that the operator can
issue sales receipts. If the operator OIB is missing and a receipt is started, VOID
ALL operation is automatically performed when payment is attempted.
D120
rEC - - -
YES5
" is displayed. The correctness of the
Contents
Up to 28 characters Default names – OPERATER
Up to 6 digits
11 digits
USER MANUAL
" is displayed for a
Notes
Default password of operator 1
– 0.
Default contents of the field:---
17
Advertisement
Table of Contents
