Digitron D120 User Manual page 15

Data entering in a digital field
When a digital field is selected, the item number is displayed on the left, followed
by the contents of the field. If the display positions are not enough, only the
content is displayed.
The new content is entered using the digit keys. In case of an error, the key –
has to be pressed so many times as necessary – each pressing clears one digit from
the right to the left. If the key – is pressed and hold down, all the entered digits
are cleared.
Data entering in a character field
When a character field is selected, the item number is displayed on the left,
followed by the number of the first character and the ASCII code of the character.
The ASCII codes of the characters are entered, using the digit keys. If an ASCII
code includes a leading zero, it is obligatory to be entered. An automatic transition
to the next character is done when 3 digits are entered (the displayed character
number increases by 1).
Pressing the key Š , when a character field is entered, prints the current text.
Pressing the key combination ‡ Œ when a character field is entered
prints a table of the ASCII codes. A character code can be calculated through
adding the column number to the number printed at the end of the row, where the
character is printed.
ATTENTION! Pressing the key ª in a character field clears its contents and
performs positioning for entering the first character in the field.
D120 USER MANUAL 15