Table of Contents
Advertisement
3.5. Passwords and operators
The different ECR operation modes are accessed through entering a password,
corresponding to each mode. 4 different passwords can be programmed (in
parameter 11), corresponding to the modes: X reports, Z reports, Programming
mode and Service mode. Operation of 10 operators is possible in Registration
mode. Their names, passwords and ID number (OIB) are programmable
(parameter 1). The operator passwords have to be different.
3.6. PLU and PLU groups
Each item of the PLU parameter is used for programming of one PLU or PLU
group. The difference between a PLU and a PLU group is the following: free
prices (entered at the moment of the sale) are enabled only for a PLU group.
The number of PLUs and PLU groups depends on parameter 3, which determines
the structure of the PLU database. Parameter 3 specifies the usage of bar codes
and available quantities. When the user sets these options in the appropriate way,
the actual PLU number is calculated.
3.7. Printed documents
Before the ECR activation, the ECR operates in Training mode. All receipts and
reports include the message "TRAINING RECEIPT"(TRENING RAČUN).
Note: Even after the ECR activation (performed in the Service mode), there
is a possibility for training mode usage. An option in parameter 10, field 1 is
used to enable the training mode in this case.
After the ECR activation, all the receipt and reports include the taxpayer OIB.
If a graphic logo is uploaded in the ECR memory, it is printed at the beginning of
the receipts and reports.
A header message is printed in all receipts and reports. The header is
programmable and includes up to 8 text lines for the owner's data: trade name,
address etc.
The ECR provides the possibility for printing of a footer message (up to 2 lines) in
the receipts and reports.
All receipts and reports include the date and time of printing, the current receipt
number and the ECR identification number (Tv.Br.).
D120
USER MANUAL
11
Advertisement
Table of Contents
