Data Saving; Editing A Character Field - Digitron D120 User Manual

Character codes:
Space - 032 0 – 048
! – 033 1 – 049
" – 034 2 – 050
# – 035 3 – 051
$ – 036 4 – 052
% –037 5 – 053
& – 038 6 – 054
'– 039 7 – 055
( – 040 8 – 056
) – 041 9 – 057
* – 042 : – 058
+ – 043 ; – 059
, – 044 < – 060
- – 045 = – 061
. – 046 > – 062
/ – 047 ? – 063
@ – 064

5.2.6. Data saving

Pressing the key Œ or  confirms and saves the newly entered data. The
difference in the usage of these two keys is the following: after saving with 
the ECR returns to the submenu "parameter field and item" and the next field
number is displayed (the first field follows the last one); after saving with Œ
the ECR keeps displaying the contents of the field – the key
exit the field.
The ECR beeps to show an error if an inadmissible value is attempted to be
entered and saved.

5.2.7. Editing a character field

When a character field is selected, the keys " and " are used to reach the
number of the character, that has to be changed. The correct code is entered. If
there are other wrong characters in the same field (text), " and " are used
again to reach a wrong code. When all necessary codes are entered correctly, the
change is confirmed and saved through  or Œ .
16
A – 065 Q – 081
B – 066 R – 082
C – 067 S – 083
D– 068 T – 084
E – 069 U – 085
F – 070 V – 086
G – 071 W – 087
H – 072 X– 088
I – 073 Y – 089
J – 074 Z – 090
K – 075 [– 091
L – 076 \ – 092
M – 077 ] – 093
N– 078 ^ – 094
O – 079 _ – 095
P – 080 ` – 096
USER MANUAL
a – 097 q – 113
b – 098 r – 114
c – 099 s – 115
d – 100 t – 116
e – 101 u – 117
f – 102 v – 118
g – 103 w – 119
h – 104 x – 120
i – 105 y – 121
j – 106 z – 122
k – 107 { – 123
l – 108 | – 124
m – 109 }– 125
n – 110 ~ – 126
o – 111
p – 112
is pressed to
‹
Š – 138
Ž – 142
š – 154
ž – 158
Ć – 198
Č – 200
Đ – 208
ć – 230
č – 232
đ – 240
D120