A permanent data sheet should be prepared on each
refrigeration system at an installation, with a copy for the owner
and the original for the installing contractorʼ s files.
System Reference Data
The following information should be filled out and signed by Refrigeration Installation Contractor at time of start-up.
Date System Installed:
Installer and Address:
Condensing Unit
Compressor Model #:
Compressor Serial #:
Electrical
Voltage at Compressor
Amperage at Compressor
Service Record
If another firm is to handle service and maintenance, additional
copies should be prepared as necessary.
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
Unit Model#:
Unit Serial #:
____________________ Compressor Model #: _________________
____________________ Compressor Serial #: __________________
_________________
L1__________ L2 ___________
L1__________ L2 ___________
________________________________________
________________________________________
Volts
__________________ Phase _______
L3 ___________
L3 ___________
21