Table of Contents
Advertisement
Refrigeration Equipment Price List
TA(K) thin profile ..............................................................................................2
LTA extended thin profile ............................................................................2
TL thin profile ....................................................................................................3
LTL extended thin profile ..............................................................................3
VA(K) V-profile ...................................................................................................4
C(K) high profile ...............................................................................................4
KMK/RAMK Kompact mullion (down-flow/reverse-flow) .................5
BBM/BBL back bar ...........................................................................................5
U(K) dual-air.......................................................................................................6
BTO(K) twin flow ..............................................................................................6
ADT low profile .................................................................................................7
LET/LLE low profile .........................................................................................8
HGT low profile ................................................................................................9
LO/LOD/LOG low velocity .......................................................................... 10
WK/WKE/WKG low velocity ....................................................................... 11
SM/SME dual flow center mount ............................................................ 12
HR half-round radial aire ............................................................................ 12
BMA medium profile ................................................................................... 13
BME medium profile ....................................................................................14
BML medium profile ....................................................................................15
BMG/BMF medium profile ........................................................................ 16
ADT/HGT low profile ................................................................................... 17
WKA/WKG low velocity center mount .................................................. 17
BMA medium profile .................................................................................. 18
Glycol options ................................................................................................18
BHA high profile ............................................................................................19
BHE high profile ............................................................................................20
BHL high profile .............................................................................................21
BHG high profile ...........................................................................................22
BHF high profile ............................................................................................23
RIPENING ROOM EVAPORATORS
RU ripening room equipment ................................................................. 24
EVAPORATOR OPTIONS
Factory-installed .....................................................................................25-26
Shipped-loose .........................................................................................27-28
Hot gas defrost ........................................................................................29-31
Beacon II™ refrigeration system ........................................................32-33
3
PRO
packaged refrigeration systems .................................................34-35
© 2008 Heatcraft Refrigeration Products LLC
Prices and specifications subject to change without notice
Table of Contents
BH 1/2 - 5 HP hermetic .........................................................................36-37
BS 1/2 - 5 HP semi-hermetic ...............................................................38-39
1/2 - 6 HP factory-installed options .................................................40-41
3 - 22 HP factory-installed options ...................................................45-46
BLV/BDVS 12 - 40 HP .............................................................................47-48
BLV/BDVS 12 - 40 HP options ................................................................... 49
JLD/JDDS 24 - 80 HP ....................................................................................50
JLD parallel-piped dual compressor ...................................................... 51
JLD/JDDS 24 - 80 HP options ................................................................... 52
WATER-COOLED & REMOTE COMPRESSOR
HWN/ZWN 1/2 - 6 HP hermetic & Scroll
SWN semi-hermetic .....................................................................................54
SRN semi-hermetic remote compressor .............................................. 55
SWN/SRN options .........................................................................................56
DVT 1 - 26 ton and options ....................................................................... 57
BNE Monarch™ Series .................................................................................58
BNL Monarch™ Series ..................................................................................59
BNX Ambassador™ Series .......................................................................... 60
BNQ Ambassador™ Series ......................................................................... 61
BNH 1140 Series ............................................................................................62
Monarch™ Series options .......................................................................... 63
Ambassador™ & 1140 Series options ..............................................64-65
Condenser coil options .............................................................................. 66
DFT 5 - 26 ton and options........................................................................67
BFH direct-drive ......................................................................................68-69
BFH direct-drive options ............................................................................ 70
OTHER PRODUCTS
SW booster coil .............................................................................................71
Terms of sale ............................................................................ 72
Compressor warranty list pricing ........................................... 72
Catalog products warranty ................................................73-74
Prices effective February 1, 2008
Replaces BN-PL0208-000 • 02/08
®
..........................................................................................39
®
...............................................................................42-43
®
.......................................................................................44
®
and options .....................53
BN-PL0208
Advertisement
Table of Contents
Related Manuals for Heatcraft Refrigeration Products BN-PL0208
Summary of Contents for Heatcraft Refrigeration Products BN-PL0208
-
Page 1: Table Of Contents
Hot gas defrost ...29-31 REFRIGERATION SYSTEMS Beacon II™ refrigeration system ...32-33 packaged refrigeration systems ...34-35 © 2008 Heatcraft Refrigeration Products LLC Prices and specifications subject to change without notice Table of Contents AIR-COOLED CONDENSING UNITS • 1/2-80 HP BH 1/2 - 5 HP hermetic ...36-37 BS 1/2 - 5 HP semi-hermetic ...38-39... -
Page 2: Reach-In Evaporators
Reach-in Evaporators (Refrigerated Cabinets) FAMILY • Ceiling-mount • Rust-proof fasteners • Textured aluminum cabinet • Molded Lexan fan guards ® • Air is drawn in through fan and discharges away from coil. • Sweat inlet connection to reduce leaks (Flare connection available as a shipped- loose option) •... -
Page 3: Tl Thin Profile
Reach-in Evaporators (Refrigerated Cabinets) Nomenclature Example: Model Family FAMILY • Ceiling-mount • Textured aluminum cabinet • Molded Lexan fan guards ® • Rust-proof fasteners • Electric defrost heaters terminate on coil temperature • Built-in fan delay allows the coil to chill before turning on •... -
Page 4: Va(K) V-Profile
Reach-in Evaporators (Refrigerated Cabinets) Nomenclature Example: Model Family FAMILY • Ceiling- or wall-mount • Textured aluminum cabinet • Molded Lexan fan guards ® • Air is drawn in through fan and discharges away from coil • Sweat inlet connection to reduce leaks (Flare connection available as a shipped- loose option) •... -
Page 5: Kmk/Ramk Kompact Mullion (Down-Flow/Reverse-Flow)
Reach-in Evaporators (Refrigerated Cabinets) Nomenclature Example: Model Family FAMILY KMK/RAMK Model KMK Standard Mullion • KMK Series features Mullion Wall mount; Air enters top & discharges at the bottom • RAMK Series features Reverse Air Mullion Wall mount; Air enters bottom & discharges at the top •... -
Page 6: U(K) Dual-Air
Reach-in Evaporators (Refrigerated Cabinets) Nomenclature Example: Model Family FAMILY • Draws air in through the front and discharges it out both sides to ensure proper distribution • Textured aluminum cabinet • Flare connection • UL recognized, UL recognized for Canada and NSF listed * Model numbers are normally in stock. -
Page 7: Walk-In Evaporators
Walk-in Evaporators – Low Profiles (Coolers and Freezers) Nomenclature Example: Model Family FAMILY • Design features easy front access to both electrical and refrigeration components • Textured aluminum cabinets • Design optimizes space for easier installation and servicing • Beacon II™ compatible •... -
Page 8: Let/Lle Low Profile
Walk-in Evaporators – Low Profiles (Coolers and Freezers) Nomenclature Example: Model Family FAMILY • Design features easy front access to both electrical and refrigeration components • Textured aluminum cabinets • Design optimizes space for easier installation and servicing • Beacon II™ compatible •... -
Page 9: Hgt Low Profile
Walk-in Evaporators – Low Profiles (Coolers and Freezers) Nomenclature Example: Model Family FAMILY • Design features easy front access to both electrical and refrigeration components • Textured aluminum cabinets • Design optimizes space for easier installation and servicing • Liquid-line solenoid wire harness comes standard on unit •... -
Page 10: Lo/Lod/Log Low Velocity
Walk-in Evaporators – Low Velocity (Coolers) Nomenclature Example: Model Family FAMILY LO/LOD/LOG • Smooth prepainted white aluminum cabinet • Ceiling-mount with low air velocity fans on each end • Air flows from coil on each side for comfort • Thermal overload protected motors are resiliently mounted inside the unit to assure minimum noise level •... -
Page 11: Wk/Wke/Wkg Low Velocity
Walk-in Evaporators – Low Velocity Center Mounts (Coolers) Nomenclature Example: Model Family FAMILY WK/WKE/WKG • Unit designed to be mounted flush to the ceiling or suspended by rods • Air is pulled through the bottom and blows out through the coil sides •... -
Page 12: Sm/Sme Dual Flow Center Mount
Walk-in Evaporators – Dual Flow Center Mounts (Coolers and Freezers) Nomenclature Example: Model Family FAMILY • Flush mount design • Air is pulled through the bottom and blows out through the coil sides • Textured aluminum cabinet • PVC coated steel wire fan guards •... -
Page 13: Bma Medium Profile
Walk-in Evaporators – Medium Profiles (Coolers and Freezers) Nomenclature Example: Model Family FAMILY 575 V Available • Textured aluminum cabinet • Thermo-Flex coil design with extended 5-year warranty (See warranty page for details) • Heavy plastic molded fan guards for extended air throw •... -
Page 14: Bme Medium Profile
Walk-in Evaporators – Medium Profiles (Coolers and Freezers) Nomenclature Example: Model Family FAMILY 575 V Available BME Units: • Textured aluminum cabinet • Thermo-Flex coil design with extended 5-year warranty (see warranty page for details) • Heavy plastic molded fan guards for extended air flow •... -
Page 15: Bml Medium Profile
Walk-in Evaporators – Medium Profiles (Coolers and Freezers) Nomenclature Example: Model Family FAMILY 575 V Available BML Units: • Textured aluminum cabinet • Thermo-Flex coil design with extended 5-year warranty. See warranty page for details • Heavy plastic molded fan guards for extended air throw •... -
Page 16: Bmg/Bmf Medium Profile
Walk-in Evaporators – Medium Profiles (Coolers and Freezers) Nomenclature Example: Model Family FAMILY 575 V Available • Textured aluminum cabinet • Thermo-Flex coil design with extended 5-year warranty (see warranty page for details) • Heavy plastic molded fan guards • Liquid-line solenoid wiring harness for faster installation •... -
Page 17: Glycol Unit Coolers
Nomenclature Example: Model Family Glycol ADT/HGT FAMILY • Ideal for applications where a reduced refrigerant charge is desired • Specially designed for use with environmentally friendly propylene glycol mixtures • Available for medium temperature applications • Available in air or warm fluid defrost •... -
Page 18: Bma Medium Profile
Nomenclature Example: Model Family Glycol FAMILY • Ideal for applications where a reduced refrigerant charge is desired • Specially designed for use with environmentally friendly propylene glycol mixtures • Available for medium temperature applications • Available in air or warm fluid defrost •... -
Page 19: Warehouse Evaporators
Warehouse Evaporators – High Profiles (Refrigerated Warehouses) Nomenclature Example: Model Family Capacity x 100 = BTUH (10°F TD) FAMILY 575 V Available • Mill finished aluminum cabinet • Thermo-Flex coil design with extended 5-year warranty (see warranty page for details) •... -
Page 20: Bhe High Profile
Warehouse Evaporators – High Profiles (Refrigerated Warehouses) Nomenclature Example: Model Family Capacity x 100 = BTUH (10°F TD) FAMILY 575 V Available • Mill finished aluminum cabinet • Thermo-Flex coil design with extended 5-year warranty (see warranty page for details) •... -
Page 21: Bhl High Profile
Warehouse Evaporators – High Profiles (Refrigerated Warehouses) Nomenclature Example: Model Family Capacity x 100 = BTUH (10°F TD) FAMILY 575 V Available • Mill finished aluminum cabinet • Thermo-Flex coil design with extended 5-year warranty (see warranty page for details) •... -
Page 22: Bhg High Profile
Warehouse Evaporators – High Profiles (Refrigerated Warehouses) Nomenclature Example: Model Family Capacity x 100 = BTUH (10°F TD) FAMILY 575 V Available • Mill finished aluminum cabinet • Thermo-Flex coil design with extended 5-year warranty (see warranty page for details) •... -
Page 23: Bhf High Profile
Warehouse Evaporators – High Profiles (Refrigerated Warehouses) Nomenclature Example: Model Family Capacity x 100 = BTUH (10°F TD) FAMILY 575 V Available • Mill finished aluminum cabinet • Thermo-Flex coil design with extended 5-year warranty (see warranty page for details) •... -
Page 24: Ru Ripening Room Equipment
Nomenclature Example: Model Unit Size 05 = 1/2 Carload Room 10 = 1 Carload Room FAMILY Standard Features: • Heavy gauge galvanized steel cabinet and base rails • Heavy gauge frames. • Fan bearings are rugged, self-aligning ball bearings • Coils have plate-type aluminum fins with full collars on expanded copper tubes. -
Page 25: Factory-Installed
Factory-installed Options For Evaporators Factory-installed Electrical Option Pricing ($US) Adjustable (Choose One) Defrost Model Term./ Motors++ Motors Fans Electric Hot Gas Fan Delay 040-065 070-130 140-180 1,455 1,940 2,425 312-370 2,910 035-047 Standard 065-090 Standard 120-140 1,455 Standard 160-180 1,940 Standard 2,425 Standard... -
Page 26: Factory-Installed
Factory-installed Options For Evaporators Factory-installed Electrical Option Pricing ($US) Adjustable Totally* Model Enclosed Motors Motors Fans Motors Fan Delay 130-155 Standard 245-300 1,170 Standard 365-450 1,755 Standard 510-600 2,340 Standard 2,925 1,108 Standard 101-140 Standard 190-260 Standard 1,170 310-390 1,755 Standard 430-520 2,340... - Page 27 Shipped-loose Options For Evaporators Reach-in Evaporators Options Flare connection adaptor for expansion valve Option Adapter for 3/8" OD Sweat to 1/2" Flare Adapter for 1/2" OD Sweat to 1/2" Flare * All reach-in families except dual air “U”. Expansion Valves (TXV) Valve Size / BTU’s List Price Each ($US) 2 tons / 24,000 and smaller...
- Page 28 Shipped-loose Options For Evaporators Long Air Flow Collars – Warehouse Evaporators (High Profile) Model Size (Capacity x 100) Air Defrost Electric & Hot Gas Defrost 6 FPI 8 FPI 1100 1170 1400 1610 1900 2160 2200 2500 2440 2780 Heat Exchangers Model Part # Capacity (HP)
-
Page 29: Hot Gas Defrost
REVERSE CYCLE HOT GAS DEFROST KIT SELECTION INSTRUCTIONS 1. Decide if kits are to be shipped-loose or factory-installed. If kits are to be shipped-loose, use the first two tables. If kits are to be factory mounted, use the two tables at the bottom of the page. 2. - Page 30 1 - LOW PROFILES CONTINUED Hot Gas 3-Pipe Kits (Shipped-loose) 3-Pipe Kits Hot Gas Loop (Standard) & Electric Drain Pan TXV Assembly Kits HGT 6 FPI HGT 4 FPI SQE/SBF 035 - 075 041 - 080 50169410 090 - 160 102 - 204 50169411 180 - 280...
-
Page 31: Shipped-Loose
2 - LOW VELOCITY Reverse Cycle Kits LOG - TXV Bypass Kit Part # Model (Shipped-loose) 070 - 225 89900901 89901001 * Electric pan is standard in all hot gas models. * Kits includes one check valve and piping for liquid bypass around expansion valve and instructions for field installation. -
Page 32: Refrigeration Systems
Beacon II™ is the first pre-assembled refrigeration system with factory tested and mounted components, featuring an integrated microprocessor electronic control board, preset for standard applications. System Features and Benefits: Factory Mounted Components • Beacon II™ microprocessor • Solid state temperature sensors •... - Page 33 Steps for Pricing a Beacon II™ System: 1. Determine condensing unit and evaporator(s) needed for the heat load 2. Price the Beacon II™ condensing unit model with options 3. Defrost kits are not required as Beacon II™ components include accessories necessary for defrost 4.
- Page 34 Top Mount Packaged Refrigeration System Nomenclature Example: Package Top Mount N = Indoor System T = Outdoor FAMILY PTN/PTT Mount Packaged Refrigeration System Reliability/Durability • System is fully assembled at the factory and backed up by Bohn’s superior quality control •...
- Page 35 Side Mount Packaged Refrigeration System Nomenclature Example: Package Side Mount T = Outdoor System (unit is also appropriate for indoor) FAMILY Side Mount Packaged Refrigeration System Ease of Installation and Operation • Shortened installation time (2 hours installation time vs. 8 hours for a typical split system) •...
-
Page 36: Air-Cooled Condensing Units • 1/2-80 Hp Bh 1/2 - 5 Hp Hermetic
1/2 - 6 HP Air-cooled Condensing Units Standard Features: • Oversized aluminum fin, copper tube condenser for high ambient operation • Motors rated for 50 and 60 cycle application in 120°F ambient • Fans specifically matched with motor and coil to attain maximum air movement and cooling •... -
Page 37: Hermetic Medium/Low Temperature Condensing Units Table
1/2 - 6 HP Air-cooled Condensing Units OUTDOOR (T) INDOOR (N) • Prepainted galvanized cabinet • No cabinet hood • Head pressure control valve • Fan guards • Crankcase heater • Wiring conduit • Fixed low pressure control for H2, M2, •... -
Page 38: Bs 1/2 - 5 Hp Semi-Hermetic
1/2 - 6 HP Air-cooled Condensing Units OUTDOOR (T) INDOOR (N) • Prepainted galvanized cabinet • No cabinet hood • Head pressure control valve • Fan guards • Crankcase heater • Wiring conduit • Fixed low pressure control for H2, M2, •... -
Page 39: Bz 2 - 6 Hp Scroll
1/2 - 6 HP Air-cooled Condensing Units OUTDOOR (T) INDOOR (N) • Prepainted galvanized cabinet • No cabinet hood • Head pressure control valve • Fan guards • Crankcase heater • Wiring conduit • Fixed low pressure control for H2, M2, •... -
Page 40: 1/2 - 6 Hp Factory-Installed Options
1/2 - 6 HP Factory-installed Options Electrical Options Air Defrost timer, medium temperature Electric defrost timer Electric Defrost Kit: timer, heater and fan contactors,lockout relay Adjustable low pressure control for H2, M2, and M6 models Dual pressure control with superhose Mounted fused disconnect Phase loss/ low voltage monitor Fixed fan cycling (2 fan units) -
Page 41: Hp Factory-Installed Options
1/2 - 6 HP Factory-installed Options Mechanical Options R-22 : Quick connect fittings and refrigerant (must be ordered with liquid-line assemblies) R-404A : Quick connect fittings and refrigerant (must be ordered with liquid-line assemblies) Precharged Line Set with Refrigerant and Quick Connect Fittings at Both Ends Line 7 Feet List... -
Page 42: Bd 3 - 22 Hp Discus
3 - 22 HP Horizontal Air Flow Condensing Units Nomenclature Example: Model Compressor Application B = Bohn D = Discus T = Outdoor ® Z = Scroll N = Indoor ® S = Beacon II™ Standard Features: • Floating Tube™ coil design •... - Page 43 3 - 22 HP Horizontal Air Flow Condensing Units • Floating Tube™ coil design • Manual pump-down switch • Sentronic ® oil failure switch with Discus ® compressors • Spring mounted Discus compressors with suction and ® discharge vibration eliminators •...
-
Page 44: Bz 3 - 22 Hp Scroll
3 - 22 HP Horizontal Air Flow Condensing Units Standard Features: • Floating Tube™ coil design • Manual pump-down switch • Refrigeration duty, Type K, rifled, copper tube condenser • Fixed high and adjustable low pressure switches • ServiceMate™ Diagnostic Module, standard on non-Beacon II™ condensing unit •... -
Page 45: 3 - 22 Hp Factory-Installed Options
3 - 22 HP Factory-installed Options Models ® BD-Discus H2 & M6 ® BD-Discus L2 & L6 ® BZ-Scroll ® BZ-Scroll L2 & L6 Electrical Option Air defrost timer Electric defrost kit (timer, heater contactor, terminal strip, single fan contactor) Fuses for electric defrost kits Evaporator hold out relay Adjustable high pressure switch w/ manual reset... - Page 46 Models ® BD-Discus H2 & M6 ® BD-Discus L2 & L6 ® BZ-Scroll ® BZ-Scroll L2 & L6 Mechanical Options Liquid-line filter (permanent) & sight glass Liquid-line filter (replaceable core) & sight glass ‡ Liquid-line solenoid installed Suction-line filter (permanent) Suction-line filter (replaceable core) Suction accumulator Head pressure control valve - 180psi fixed...
-
Page 47: Blv/Bdvs 12 - 40 Hp
12 - 40 HP BLV/BDVS Vertical Air Discharge, Discus Nomenclature Example: Model Compressor Style ® B = Bohn D = Discus V = Vertical OUTDOOR (T) • Prepainted galvanized cabinet • Head pressure control valve • Liquid-line filter drier & sight glass •... -
Page 48: Standard Features
12 - 40 HP BLV/BDVS Vertical Air Discharge, Discus OUTDOOR (T) Beacon II™ OUTDOOR (S) • Prepainted galvanized cabinet • Wired for Beacon II™ control • Head pressure control valve • Head pressure control valve • Liquid-line filter drier & sight glass •... -
Page 49: Blv/Bdvs 12 - 40 Hp Options
12 - 40 HP Factory-installed Options BLV/BDVS Vertical Air Discharge, Discus Option Air defrost timer 1200 - 2201L6 (230V) Electric defrost (non-Beacon II ™ ) timer, fan contactor, terminal strip 1500 - 2001 med. (460V) and (1L/1H) single heater contactor 1200 - 3001L6 (460V) (please see technical bulletin for proper ampacity ratings) -
Page 50: Jld/Jdds 24 - 80 Hp
24 - 80 HP JLD/JDDS Dual Compressor Condensing Units OUTDOOR (T) Beacon II™ OUTDOOR (S) • Prepainted galvanized cabinet • Outdoor unit • Head pressure control valve • Wired for Beacon II™ control • Crankcase heater • Beacon II™ fan cycling for two fan units •... -
Page 51: Jld Parallel-Piped Dual Compressor
Parallel-piped Dual Compressor Vertical Condensing Units Standard Features: • Dual compressor unit in one easy to install package • Liquid line with filter drier, sight glass and shut-off valve • Floating Tube™ coil design • Condenser built with rifled tubing and a separate subcooler coil for extra performance ®... -
Page 52: Jld/Jdds 24 - 80 Hp Options
24 - 80 HP JLD/JDDS Dual Compressor Condensing Units Options JLD/JDDS Factory-installed Options Option prices are per unit and include the accessories for Two compressors Option Air defrost timers Smart Defrost Kit™ — Factory-installed Smart Defrost Kit™ — Shipped-loose Electric defrost (non-Beacon II ™ ) timer, fan contactor, terminal strip and single heater contactor (please see technical bulletin for proper ampacity ratings) Dual heater contactors (please see technical bulletin for proper... -
Page 53: And Options
1/2 - 6 HP Hermetic and Scroll Standard Features: • Compressor mounting (rubber grommets) • Compressor discharge service valve (in line brass base valve) • Compressor suction service valve — rotolock • Large capacity refrigerant receiver (up to 100 ft. runs) •... -
Page 54: Swn Semi-Hermetic
Semi-hermetic Water-cooled Condensing Units Standard Features: • Solid mounted semi-hermetic reed and Discus ® • Spring mounted compressor 0499 and above • Oil pressure switch (where required) • High-low pressure controls • Compressor contactor • Shell and tube water-cooled condenser with pressure relief •... -
Page 55: Srn Semi-Hermetic Remote Compressor
Semi-hermetic Remote Compressor Units Standard Features: • Solid mounted semi-hermetic reed and Discus ® • Spring mounted compressor 0499 and above • Oil pressure switch (where required) • High-low pressure controls • Compressor contactor • Liquid receiver with pressure relief •... -
Page 56: Swn/Srn Options
Remote and Water-cooled Condensing Units Options Options for Semi-hermetic Remote & Water-cooled Condensing Units Option Dual Pressure Control Liquid Replaceable Core Filter Liquid-line Solenoid Valve* Compressor Spring Mount Includes Discharge and Suction Vibration Eliminators Standard on 0499 and Above Suction-line Permanent Filter Suction-line Replaceable Core Filter Suction Accumulator Oil Separator, Check Valve and Hand Valve... -
Page 57: Dvt 1 - 26 Ton And Options
1 - 26 Ton DVT Air-cooled Condensers and Options Standard Features: • Heavy gauge smooth aluminum cabinet for long life and attractive appearance • Internally protected, permanently lubricated ball bearing motors with automatic reset • Direct-drive fans, PVC coated steel fan guards, low fan tip speed design, fan cells completely baffled •... -
Page 58: Bne Monarch™ Series
Monarch™ Series of Air-cooled Condensers Nomenclature Example: Brand Vintage Motor Type B = Bohn N = Vintage E = Variable Speed EC Motor Q = 540 RPM (0.5 HP) X = 830 RPM (1.0 HP) L = 830 RPM (1.5 HP) H = 1140 RPM (1.5 HP) Standard Features: •... -
Page 59: Bnl Monarch™ Series
Ambassador™ Series of Air-cooled Condensers Standard Features: • Direct-drive 1.5 HP fan motors in 830 RPM • Patented QuietEdge™ fan blade for low sound levels • Patent-pending ServiceEase™ motor mount for serviceability • Advanced coil technology to provide maximum capacity •... -
Page 60: Bnx Ambassador™ Series
Ambassador™ Series of Air-cooled Condensers Standard Features: • Direct-drive 1 HP fan motors in 830 RPM • Patented QuietEdge™ fan blade for low sound levels • Patent-pending ServiceEase™ motor mount for serviceability • Advanced coil technology to provide maximum capacity •... -
Page 61: Bnq Ambassador™ Series
Ambassador™ Series of Air-cooled Condensers Standard Features: • Direct-drive .5 HP fan motors in 540 RPM • Patented QuietEdge™ fan blade for low sound levels • Patent-pending ServiceEase™ motor mount for serviceability • Advanced coil technology to provide maximum capacity •... -
Page 62: Bnh 1140 Series
1140 RPM Series of Air-cooled Condensers Standard Features: • Direct-drive fan motors in 1140 RPM • Bohn’s patent-pending ServiceEase™ motor mount • New, high efficiency condenser coil designed for optimum performance • Expanded product range from 15 to 249 nominal tons •... -
Page 63: Air-Cooled Condensers
Options Pricing Guide – Monarch Air-cooled Condenser Option Pricing Matrix ($US) Option Description Fan Cycling Options (Must Select Fan Cycling and Contactor Option) Proportional Pressure Control 1,914 1,914 Electrical Options Fused Disconnect Individual Motor Fuses Paired Motor Fuses Individual Circuit Breakers Paired Circuit Breakers Individual Motor Terminal Boards... -
Page 64: Ambassador™ & 1140 Series Options
Options Pricing Guide – Ambassador Air-cooled Condenser Option Pricing Matrix ($US) Option Description Fan Cycling Options (Must Select Fan Cycling and Contactor Option) Individual Motor Contactors; 230V, 115V, 24V Paired Motor Contactors; 230V, 115V, 24V Ambient Fan Cycling* Pressure Fan Cycling Mech. w/o 1,213 Header* Pressure Fan Cycling Mech. - Page 65 Options Pricing Guide – Ambassador Air-cooled Condenser Option Pricing Matrix ($US) Option Description Mechanical options Aluminum or Pre-Painted Steel Cabinet Coil Access Panels, Galv Coil Access Panels, AL or Painted Steel Hinged Venturi Connection Manifold (shipped- loose) Extended Legs: 30", 36", 42" Paratemp, 20"...
-
Page 66: Condenser Coil Options
Condenser Fin and Coil Protection Options BNH-S01-A007 BNL-S01-A007 BNH-S01-A009 BNL-S01-A008 BNH-S02-A011 BNL-S02-A010 BNH-S02-A015 BNL-S02-A014 BNH-S02-A017 BNL-S02-A016 BNH-S03-A022 BNL-S03-A021 BNH-S03-A026 BNL-S03-A024 BNH-S04-A029 BNL-S04-A028 BNH-S04-A034 BNL-S04-A032 BNH-S05-A037 BNL-S05-A035 BNH-S05-A044 BNL-S05-A042 BNH-S06-A053 BNL-S06-A050 BNH-S07-A061 BNL-S07-A055 BNH-D04-A021 BNL-D04-A020 BNH-D04-A029 BNL-D04-A028 BNH-D04-A034 BNL-D04-A032 BNH-D06-A044 BNL-D06-A042 BNH-D06-A051 BNL-D06-A048 BNH-D08-A058... -
Page 67: Fluid Coolers Dft 5 - 26 Ton And Options
-26 Ton DFT Fluid Coolers and Options Standard Features: • Specifically engineered for outdoor installations. Cabinet is constructed of heavy gauge aluminum to resist corrosion in all climates • Fully baffled fan sections to prevent windmilling • Single point wiring to junction box •... -
Page 68: Bfh Direct-Drive
Standard Features: • Modular design with models in single and double rows of fans • Fan motors are direct-drive in 1140 RPM • Housing constructed with heavy gauge aluminum • Internal baffles provided between all fan cells • Floating Tube™ coil design •... -
Page 69: Bfh Direct-Drive
BFH Direct-drive Fluid Coolers (cont.) Standard Features: • Modular design with models in single and double rows of fans • Fan motors are direct-drive in 1140 RPM • Housing constructed with heavy gauge aluminum • Internal baffles provided between all fan cells •... -
Page 70: Bfh Direct-Drive Options
BFH Direct-drive Fluid Coolers Options BFH Options Connection Manifold Kits (Shipped-loose) Numbers Inlet of Feeds 18, 28, 36 2 @ 2 1/8 42, 56 2 @ 2 5/8 2 @ 3 1/8 2 @ 3 5/8 Fan Cycling* 1,216 1,526 * On leaving liquid temperature NOTES: •... -
Page 71: Sw Booster Coil
Nomenclature Example: Surface Water Rows Deep List One Row Coil “A” “B” Price Model Dim. Dim. ($US) SW106068 2.25 2.00 SW106098 2.25 2.00 SW106128 2.25 2.00 SW106158 2.25 2.00 SW106188 2.25 2.00 SW109098 2.25 2.00 SW109128 2.25 2.00 SW109158 2.25 2.00 SW109188 2.25... -
Page 72: Terms Of Sale
ORDER ACCEPTANCE: All orders must be in writing and are subject to acceptance by SELLER at its principal office. PAYMENT: Payment is due net thirty (30) days from date of invoice. PRICES: Prices are based on products made to SELLER’S standard manufacturing tolerances. Prices of products are subject to change prior to shipment. SELLER reserves the right to change prices on Buyer’s orders to those prices in effect at time of shipment. -
Page 73: Catalog Products Warranty
PRODUCTS CONTAINING THE THERMO-FLEX Heatcraft Refrigeration Products LLC will warrant the evaporator and condenser coil for a period of five (5) years from the date of shipment. In ad- dition to the standard product warranty, Heatcraft will, at its option, pay for repairs or replacement of the coil section of the “BM” or “BH” series of Unit Coolers;... -
Page 74: Catalog Products Warranty
Catalog Products Warranty Continued MOTOR COMPRESSORS: Motor compressors furnished by SELLER are subject to the standard warranty terms set forth above, except that motor compressor replacements or exchanges shall be made through the nearest authorized wholesaler of the motor compressor manufacturer (not at SELLER’s factory) and no freight shall be allowed for transportation of the motor compressor to and from the wholesaler. - Page 76 Visit our website at www.thecoldstandard.com for technical literature online. Since product improvement is a continuing effort, we reserve the right to make changes in specifications without notice. A Brand of Heatcraft Refrigeration Products 2175 West Park Place Blvd. Stone Mountain, GA 30087 800.537.7775 •...