Table of Contents
Advertisement
Always push the socket back into oosition before sewing.
Pull the upper thread through the needle eye and hold
it
loosely with the left
hand.
Turn the hand wheel toward you with the right hand until the needle
moves down and up again to its highest point, thus catching the lower (bobbin)
thread.
Now
pull
the
end
of
the
upper
thread
you
are
holding
and
the
bobbin
thread will
be brought up
with
it
through the needle hole in
the needle plate, as shown in Fig. 16.
Place both ends of thread hack under
the presser foot.
Note
For straight sewing, the zigzag width regulating lever (Fig. 1—3) must be
set to the right, so that the zigzag width indicator points to
0
10
The light is turned on and off by means of the switch (B). (Fig. 15)
TO START SEWING
(Fig. 16)
ing to the directions already given.
Place the fabric
the presser foot,
it
and then start
to be sewn beneath
lower the foot upon
the machine accord-
Hide quick links:
Advertisement
Table of Contents
