Table of Contents
Advertisement
?ESSER FEET
This machine is firzed with a zigzag presser
foot for general sewing purposes. In the
acessor box are The following additional
esser
feet:
1. Straight stitch foot
2. Zipper foot
3. Blind hem foot
CANGNG PFESSER FEET
3e sure needle is in
the up position. Raise
Fi
presser foot lever.
g.
Snap-on presser feet
1. Raise foot release lever to remove the
foot. (Fig. 1)
2. Place the desired foot on the needle plate
aligning needle holes. (Fig. 1)
3. Lower the presser foot lever so that the
foot holder snaps on the foot. (Fig. 2)
Foot holder
Fig.2
DARNING PLATE
There are a few times when you want to
control the feeding of the fabric yourself.
Raise needle to its highest position and raise
presser foot. Attach darning plate over
needle plate aligning two pins of darning
plate with holes of needle plate. You may
then determine the movement of the fabric
yourself.
Foot
lever
Hide quick links:
Advertisement
Table of Contents
