Table of Contents
Advertisement
TEMPERATURE CONTROL
MACHINE STATUS MENU
To access the "Machine Status "menu, press and quickly release the "SET" key. The "Set" folder label appears. To
view the Setpoint value, press the "SET" key again. The Setpoint value appears on the display. To change the
Setpoint value, use the "UP" and "DOWN" keys within 15 seconds. If the parameter is LOC = y the Setpoint cannot
be changed.
PROGRAMMING MENU
To enter the "Programming" menu, press the "SET" key for more than 5 seconds. If specified, the access
PASSWORD will be requested, (parameter "PA1"), and the label of the first folder will follow. To scroll through the
other folders, use the "UP" and "DOWN" keys. To enter the folder, press "SET". The label of the first visible
parameter appears. To scroll through the other parameters, use the "UP" and "DOWN" keys. To change the
parameter, press and release "SET" then set the desired value with the "UP" and "DOWN" keys, and confirm with
the "SET" key, to move to the next parameter.
33
- Quick Links:
- About Your Water Heater
Hide quick links:
Advertisement
Table of Contents
