Heartland 1902 Cabinet Installation Instructions
Gas, electric, combination and wood stoves
Hide thumbs
Also See for 1902:
- Product manual (9 pages) ,
- Installation and operating instructions manual (75 pages)
Advertisement
Quick Links
HEARTLAND
1050 Fountain St N. Cambridge, Ontario, Canada N3H-4R7 Phone: 1-877-650-5775
Cabinet Installation Instructions
For Gas, Electric, Combination and Wood
Stoves
For 48" Models: 7200, 6200, 6210, 5200, 5210,
30" Models: 9200, 8200, 8210, 4200, 4210
Wood Stove Models: 1903, 1902, 2603, 2602
Please Read These Instructions Thoroughly
Before Installing Your Cabinet.
English Edition
Note: If you plan to vent your exhaust hood to the outside, please refer to your range's Owner
Installation and Operating Instructions under Exhaust Hood section before completing this
installation. Note: maximum run of ducting is 25 linear feet (subtract 5' per 90 deg
elbow added to the exhaust line and 2.5' per 45 deg elbow)
Before proceeding, check for damage that may have occurred during shipping. If the
contents are damaged, inform the freight company or your dealer immediately!
Please refer to the "Installation and Operating Instructions" manual to complete your range installation
101507
© 2007 AGA-HEARTLAND
#1719
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Heartland 1902
Summary of Contents for Heartland 1902
- Page 1 For Gas, Electric, Combination and Wood Stoves For 48" Models: 7200, 6200, 6210, 5200, 5210, 30" Models: 9200, 8200, 8210, 4200, 4210 Wood Stove Models: 1903, 1902, 2603, 2602 Please Read These Instructions Thoroughly Before Installing Your Cabinet. English Edition...
- Page 2 TABLE OF CONTENTS 1. Removing Cabinet from Box ... 2 2. Assembly of Cresting panel ... 3 3. Installing Cabinets for Electric and Combination Stoves ... 4 4.Installing Cabinets for Gas Stoves ... 5 5. Installing Cabinet for Wood Stoves ... 6 6.
- Page 3 Please read through these instuctions before installing the cabinet on the stove base. TWO PEOPLE ARE REQUIRED TO DO THE INSTALLATION Cardboard Cross brace Small boxcontains: - hardware package - deflector ( not included with woodstove cabinets.) - 3 1/2"x10 exhaust adapter ( not included with woodstove cabinets.)
- Page 4 Assembly of Cresting Panel. Main Cabinet view of top of cabinet Wingnut Cresting Panel Locate cresting panel packed in bubble wrap. Unwrap the cresting panel and remove the wingnuts. Place the cresting panel on the rear of the top of the cabinet. Take the wingnuts and fasten the cresting panel to the cabinet through the holes at each end of the cabinet.
- Page 5 DO NOT REST CLOSET CORNER BRACKETS ON GLASS, to prevent damage to glass top -Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the cabinet, fasten the cabinet brackets to the stove top with machine screws .
- Page 6 -Place cabinet assembly onto stove body.(See diagram above) -Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the cabinet, fasten the cabinet brackets to the stove top with machine screws and nuts.
- Page 7 -Place cabinet assembly onto stove body. (See diagram above). -Line up holes in the bottom (foot) of the bracket with the stove top holes while one person supports cabinet, fasten the cabinet brackets to the stove with machine screws (2 each side). (See diagram above).
- Page 8 GAS, ELECTRIC AND COMBINATION STOVES ONLY Back of cabinet Sheet metal screw If you are not venting outside, attach the deflector to the rear of cabinet with 4, sheet metal screws. If you are venting outside, attach the 3 1/2" x 10" exhaust adaptor with 4, sheet metal screws.
- Page 9 COMBINATION AND ELECTRIC SELF CLEAN OR STANDARD STOVES ONLY After your exhaust hood has been installed the very last thing to do is to connect the multipin plug to the range. The receptacle is located at the rear of the stove by the main power cord. 5200, 5210,...
- Page 10 After your exhaust hood has been installed, connect the plug to the range.The female recep- tacle for the exhaust hood is located at the rear of the stove by the main power (male) recepta- cle. Simply plug the male end of the cabinet power cord into the female receptacle.
Need help?
Do you have a question about the 1902 and is the answer not in the manual?
Questions and answers