Nvidia nForce 680i User Manual page 46

Installing and Configuring the NVIDIA nForce 680i SLI Motherboard
System Monitor
!
Use this menu to monitor the real-time system status of your PC, including
temperature, voltages, and fan speed.
The following items on the CMOS Setup Utility main menu are commands
rather than submenus:
Load Defaults
!
Use this command to load the NVIDIA LinkBoost technology settings for
LinkBoost-enabled systems. Load default system settings for standard
systems.
Set Password
!
Use this command to set, change, and disable the password used to access
the BIOS menu.
Save & Exit Setup
!
Use this command to save settings to CMOS and exit setup.
Exit Without Saving
!
Use this command to abandon all setting changes and exit setup.
The following two items on the CMOS Setup Utility main menu are status
indicators:
NVIDIA LinkBoost (Status indication at bottom of screen)
!
This status indicator is displayed at the bottom of the BIOS screen and
consists of the following remarks:
"
Detected: System detects LinkBoost-capable components.
" Not Detected: The LinkBoost components are not detected.
SLI-Ready Memory (Status indication at bottom of screen)
!
This status indicator is displayed at the bottom of the BIOS screen and
consists of the following remarks:
"
Enabled: SLI-Ready memory is detected and enabled.
" Disabled: SLI-Ready memory is detected but disabled.
"
Not Detected: SLI-Ready memory is not detected.
32