Set Up For Browsing - Nokia 6800 User Manual

Set up for browsing

It should not be necessary to manually configure the browser on your phone.
Normally this is done by your wireless provider once you have subscribed to the
feature. Contact your wireless provider if you have problems using the browser.
If it is necessary to enter the settings manually, refer to the following steps.
1 Press Menu and select Services, Settings and Connection settings.
2 Select Active service settings.
You need to activate the set where you want to save the service settings. A set is
a collection of settings that are required to make a connection to a WAP service.
3 Scroll to the set that you would like to activate and press Activate.
4 Select Edit active service settings.
Select each of the settings one by one and key in all the required settings.
• Settings' name - Key in the new name for the connection set and press OK.
• Homepage - Key in the homepage address of the WAP service that you want
to use, and press OK.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
• When the connection security is On, the phone tries to use a secure connection
with the WAP service. If a secure connection is not available, the connection
will not be made. If you wish to connect anyway, with a non-secure connection,
you must set the connection security to Off.
• Data bearer - Select GSM data or GPRS.
• Bearer settings - Settings for the selected bearer. See below for more information.
For pricing, connection speed and other information, contact your network
operator or service provider.
SETTINGS WHEN GSM DATA IS THE SELECTED DATA BEARER
• Dial-up number - Key in the phone number and press OK.
• IP address - Key in the address, and press OK. You obtain the IP address from
your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Data call type - Select Analogue or ISDN.
• Data call speed - Select the speed you want to use, or select Automatic.
Automatic is available only if the current selected data call type is Analogue.
The actual data call speed depends on the service provider.
• Login type - Select Manual or Automatic.
Nokia 6800 User Guide
93
Menu functions
Copyright © Nokia 2003