Jensen JiSS-600i User Manual page 13

Docking digital music system with wireless speakers for ipod and iphone
Table of Contents

Advertisement

and listen to it through your wireless speaker system.
5.) Open the music player program on your computer, and adjust the volume of
the player program to a low level.
6). Click the play button, and slowly increase the volume level of your player
program to adjust the sound level.
7). Press the Volume+/- button on speaker boxes to control the sound level if
necessary.
Mac Based Computer (for Mac OS X)
1.) Remove the USB Transmitter from the back of the Docking Base and plug it
into the USB port of your Mac.
2.) Go to your computer system preferences and set sound output to "SYNIC
Wireless Audio" USB device
3.) Fully charge and place the two speakers within wireless range of the
transmitter that is plugged into the USB port of your computer.
4.) Link the wireless speakers by following linking instructions mentioned in the
"Getting Start" section of the manual. Now you can play music from your Mac
and listen to it through your wireless speaker system.
5.) Open the music player program on your computer, and adjust the volume of
the player program to a low level.
6). Click the play button, and slowly increase the volume level of your player
program to adjust the sound level.
7). Press the Volume+/- button on speaker boxes to control the sound level if
necessary.
SPEAKER BATTERY RECHARGING
When you remove the speakers from the Docking Base and listen to music
wirelessly, the built-in rechargeable lithium batteries will eventually reach a low
power condition. The speaker status red LED will start flashing before it
switches to solid red and then goes off, so please charge you speaker battery
immediately when the LED turns to solid red.
1. Position the two speakers onto the recessed charging area located on
the Docking Base. Each speaker has it's own charging bay.
2. The Docking Base LED for each speaker will flash green, indicating that
the speaker battery is being charged.
3. The Docking Base LED for each speaker will turn solid green after
charging for about 4 - 5 hours in speaker power off mode or once the
battery is fully recharged.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents