JUKI LU-2810 Instruction Manual page 6

❺
❻
❼


❾





❽



– 4 –
6) Install hinge ❺ on the bed with screw ❻ .
Engage the hinge with the rubber hinge of the
table. Then, place the machine head on the
machine head support rubber.
7) Securely attach head support rod ❼ to the table
until it goes no further.
8) Put reflux pipe ❾ in the oil reservoir of oil pan ❽ .
Secure the pipe in groove  .
9) Fix filter  and filter clamp  with fitting  .
10) Mount spacers  supplied with the machine
head on the frame.
11) Install bracket  on CP panel  with screws 
supplied with the panel.
12) Install bracket  on spacer  with screws 
supplied with the machine head and washers 
supplied with the panel.
Do not use the screws supplied the panel
instead of screws  supplied with the ma-
chine head.