JUKI LU-2810 Instruction Manual page 5

❷
Align
Operator's side
❹
❹
❸
❶

Table
Align
❺
2) Do not put protruding articles such as the
screwdriver and the like at the location where
the sewing machine is placed.
3) Attaching the hinge seats and the support rub-
bers of the machine head
Fix hinge seat ❶ , machine head support rubber
❷ , and spacer  (one on the right side) sup-
plied with the machine on the table with nails ❸ ,
as illustrated in the figure.
For the LU-2860, add one more spacer to each
of the right and left sides of the table if the left
bed slide cannot be opened because of interfer-
ence with the table.
4) Attaching the oil pan
Fix the oil pan ❹ supplied with the machine on
the table by tightening eight wood screws.
Attach a filter ❺ to the oil pan ❹ as shown in
5)
the figure.
– 3 –