Changing A Wheel - PEUGEOT 308 Handbook

11
PRACTICAL INFORMATION

CHANGING A WHEEL

Procedure for changing a faulty wheel
for the spare wheel using the tools pro-
vided with the vehicle.
Access to the tools
The tools are installed in the boot under
the fl oor.
To gain access to them:
open the boot,
raise the fl oor,
secure it by hooking its cord on
the hook on the rear parcel shelf
support,
unclip and remove the box containing
the tools.
184
List of tools
i
Wheel with trim
When removing the wheel , detach the trim fi rst using the wheelbrace 1 pulling
at the valve passage hole.
When refi tting the wheel , refi t the trim starting by placing its notch facing the
valve and press around its edge with the palm of your hand.
All of these tools are specifi c to your
vehicle. Do not use them for other
purposes.
1. Wheelbrace.
For removing the wheel trim and
the wheel fi xing bolts.
2. Jack with integral handle.
For raising the vehicle.
3. Wheel bolt fi nisher tool.
Used for removing the wheel bolt
fi nisher caps on alloy wheels.
4. Socket for the security
(located in the glove box).
For adapting the wheelbrace to
the special security bolts.
bolts