PEUGEOT 308 Handbook page 190

11
PRACTICAL INFORMATION
i
If you purchase a wheel of standard
size to replace the "space-saver"
type spare wheel, the spacer, lo-
cated underneath the vehicle, must
be removed. Contact a PEUGEOT
dealer or a qualifi ed workshop.
i
Tyre under-infl ation detection
The spare wheel is not fi tted with a
sensor. The punctured wheel must
be repaired by a PEUGEOT dealer
or a qualifi ed workshop.
188
Putting the wheel back in place
Store tools 2 and 3 in the box and
close the cover.
Position the box on the ground.
Place the spare wheel on the box.
Fit the black plastic centring cone in
the centre of the wheel (on steel or
"space-saver" type wheels only).
Pass the hooking device through
the cone and the wheel to secure it
to the box cover.
Raise the wheel/box
underneath the rear of the vehicle
by tightening the winch control nut
using the wheelbrace 1 .
Fully tighten the nut.
Close the fl ap with the eyelet and
cover to secure the winch.
Check that the wheel is located
squarely against the fl oor.
If not, repeat the operation.
assembly