PEUGEOT 308 Handbook page 188

11
PRACTICAL INFORMATION
CHANGING A WHEEL
Procedure for changing a
faulty wheel for the spare
wheel using the tools pro-
vided with the vehicle.
Access to the tools
The wheelbrace 1 is stowed in the boot
left-hand side trim; for access to it:
open the boot,
open the access fl ap in the left-hand
side trim,
unclip the wheelbrace
support.
The tools 2 and 3 are stowed in a box
fi tted under the spare wheel; the assem-
bly is installed underneath the rear of the
vehicle (refer to the section "Access to
the spare wheel" on the following page
for instructions on how to get them out).
186
List of tools
from its
i
Wheel with trim
When removing the wheel , detach the trim fi rst using the wheelbrace 1 pulling
at the valve passage hole.
When refi tting the wheel , refi t the trim starting by placing its notch facing the
valve and press around its edge with the palm of your hand.
All of these tools are specifi c to your
vehicle. Do not use them for other pur-
poses.
1. Wheelbrace.
For removing the wheel trim wheel
fi xing bolts.
2. Jack with integral handle.
For raising the vehicle.
3. Wheel bolt fi nisher tool.
Used for removing the wheel bolt
fi nisher caps on alloy wheels.
4. Socket for the security
(located in the glove box or in the
tool box under the spare wheel).
For adapting the wheelbrace to the
special security bolts.
bolts