ZyXEL Communications P-660HNU-Tx Support Notes page 59

Key Settings:
Rule Type selection
Active
Interface
Source IP Address
Port Number
Destination IP
Address
(3) If you want to restrict traffic by IPv6 addresses, please click Security >
Filter > IPv6 Filter.
Key Settings:
Rule Type selection
All contents copyright © 2011 ZyXEL Communications Corporation.
Select White List to specify traffic to allow and Black List to
specify traffic to disallow.
Use this field to enable or disable the filter rule.
Select the PVC to which to apply the filter.
Enter the source IP address of the packets you wish to filter.
This field is ignored if it is 0.0.0.0.
Enter the source port of the packets that you wish to filter. The
range of this field is 0 to 65535. This field is ignored if it is 0.
Enter the destination IP address of the packets you wish to
filter. This field is ignored if it is 0.0.0.0.
Select White List to specify traffic to allow and Black List to
specify traffic to disallow.
P-660HNU Series Support Notes
59