Rotection Points (Visual ) - ADT FOCUS CADET User Manual

Protection Points (Visual)
1. Using the operating panel's numeric keypad, enter a valid ID code to
display Action Menu 1. Turn off those groups to be tested.
2. Press More to display Action Menu 2.
3. Press Test to display Test Menu 1.
4. Press Sensor points to display types of devices to be tested.
5. Press Burglar to display Burglary group descriptions.
6. Press Previous or Next to display the "Group description" to be tested.
7. Press Group description to begin display of the test instructions.
8. Press More 3 times to scroll through the test instructions.
9. Press Start test to begin the system test.
10. Activate those devices to be tested. One history event will be logged for
each sensor.
11. When the test is complete, return to the operating panel and re-enter
your ID code to display Action Menu 1.
12. Press Reset to display the reset options.
13. Press Tests to exit the test mode and to return the system to normal
operation.
14. Press Continue to display Action Menu 1.
15. Press More twice to display Action Menu 3.
16. Press History to display the history menu and test results.
System Test (cont'd)
– 71 –