Table of Contents
Advertisement
ARM
Subsystem Syntax
ARM:COUNt
Parameters
Comments
Example
Chapter 3
The ARM subsystem selects the number of scanning cycles (1 to 32,767)
for each INITiate command.
ARM
:COUNt <number> MIN | MAX
:COUNt? [MIN | MAX]
ARM:COUNt <number> MIN | MAX
multiple of times (1 to 32,767) with one INITiate command when
INITiate:CONTinuous OFF | 0 is set. MIN sets 1 cycle and MAX sets
32,767 cycles.
Name
< number >
numeric
Use only values between 1 and 32,767 for the number
Number of Scans:
of scanning cycles.
ABORt, INITiate[:IMMediate]
Related Commands:
ARM:COUNt 1
*RST Condition:
Setting Ten Scanning Cycles
This example sets a Relay Matrix Switch module for 10 scans of
channels 00 through 03.
allows scanning cycles to occur a
Type
Range of Values
1-32,767 | MIN | MAX
!Set 10 scans per INIT command
!Scan channels 00-03
!Start scan, close channel 00
Relay Matrix Switch Command Reference 41
Default Value
1
Advertisement
Table of Contents
