Table of Contents
Advertisement
ARM
Subsystem Syntax
ARM:COUNt
Parameters
Comments
Example
Chapter 4
The ARM subsystem selects the number of scanning cycles (1 to 32,767)
for each INITiate command.
ARM
:COUNt <number> MIN | MAX
:COUNt? [<MIN | MAX>]
ARM:COUNt <number> MIN | MAX
times (1 to 32,767) with one INITiate command when INITiate:CONTinuous
OFF | 0 is set. MIN sets 1 cycle and MAX sets 32,767 cycles.
Name
Type
<number>
numeric
Use only numeric values between 1 and 32767, MIN, or
Number of Scans:
MAX for the number of scanning cycles.
ABORt, INITiate[:IMMediate]
Related Commands:
ARM:COUNt 1
*RST Condition:
Setting Ten Scanning Cycles
This example sets a relay matrix for 10 scans of channels 10000 through
10003. When the scan sequence completes, channels 10000 through
10003 are closed.
ARM:COUN 10
SCAN(@10000:10003)
INIT
allows scanning to occur a multiple of
Range of Values
1 - 32,767 | MIN | MAX
! Set 10 scans per INIT command
! Scan channels 10000-10003
! Start scan, close channel 10000
Matrix Modules Command Reference 53
Default Value
1
Advertisement
Table of Contents
