Table of Contents
Advertisement
2. Installation
2.1 Installation
Caution 1
•
Make sure the power switch is off before installing the cutting plotter.
•
Carefully handle the cutter to prevent any injuries.
Caution 2
Choosing a proper place before setting up the cutting plotter
Before installing your cutting plotter, select a suitable location, which meets the following conditions.
•
The machine can be approached easily from any direction.
•
Keep enough space for the machine, accessories and supplies.
•
Keep the working area stable, avoiding severe vibration.
•
Keep the temperature between 41
•
Keep the relative humidity between 30% and 70% in the workshop.
•
Protects the machine from dust and strong air current.
•
Do not place machine in direct sunlight.
Caution 3
Connecting the Power Supply
Check the plug of the power cord to see if it mates with the wall outlet. If not, please contact your dealer.
•
Insert the plug (male) into a grounded power outlet.
•
Insert the other end (female) of power cord into the AC connector of the cutting plotter.
2. Installation
o
o
-104
F in the workshop. (High temperature may damage vinyl).
2-1
Hide quick links:
Advertisement
Table of Contents
