Cutting Plotter Body - Lynx S-60 User Manual

Roll Holder Support
Media Roll Flanges
Stand
Roll Holder
Figure 1-3
1. Platen
- Provides the surface for holding and supporting media during cutting.
2. Cutting Pad
- Provides protection for the blade while the blade is cutting.
3. Alignment Ruler
– Media can be aligned with the clear guide line marks.
4. Tool Carriage
– This unit performs the cutting with the installed blade and pen
5. Grid Drum
- Moves the media back and forth during operation.
6. Control Panel
- Consists of 10 control keys and 6 LEDs.
7. Pinch Roller
– Presses the media against grid drum during cutting.
8. Knife Guide
– Easily cuts off extra media with this groove.
9. Lever
- Raises or lowers the pinch rollers.
Optional Items (see Figure 1-3)
1. Roll Holder
– Consist of two rollers to hold and feed the roll media for cutting.
2. Roll Holder Guide Bushings
- Serves to keep the roll media in place when media is pulled from the roll.
3. Media Roll Flanges
- Secures media roll fl anges in place.
4. Roll Holder Support
- Supports roll holders.
5. Stand
- Supports the cutting plotter body.
1. Learning About Your Cutter 1-3