Philips BDL4252EL User Manual page 35

BDL4252EL
NOTE:
• The primary input signal to display priority, and this item is functional
for Primary input signal only.
• Auto search is functional for No signal only. If the user set the input
source manually, the display is based on the users set priority.
APM
Power save setting.
• {Off} - No signal, direct shutdown. ( Default )
• {On} - No signal, enter into Power Save mode.
OPS settings
Set the OPS configuration under each power condition.
• {Auto} - After selecting {Card OPS} for video source input, the
OPS will be set to off when the display power is set to off, or set to
on when the display power is set to on. When set to other video
source inputs, the OPS will always be set to on.
• {Always off} - The OPS will always be set to off.
• {Always on} - The OPS will always be set to on.
Advanced option reset
Reset all settings in the Advanced option menu to factory preset values.
1. Press [SET] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the [SET]
button to restore settings to factory preset values.
3. Press the [EXIT] button or select {Cancel} and press the [SET]
button to cancel and then return to the previous menu.
Picture
Date and time
Screen
Schecule
Monitor ID
Audio
DDC/CI
PIP
HDMI with One Wire
Smart power
Configuration1
Auto signal detection
Configuration2
APM
OPS settings
Advanced option
Advanced option reset
Action
Action
Action
On
Off
Off
Action
Off
Always on
Action
26