Configuration2 Menu; Advanced Option Menu - Philips BDL4252EL User Manual

BDL4252EL
Network settings
Assign {IP address}, {Subnet Mask}, and {Default gateway} for the
display.
Network settings
Network host name
DHCP
IP address
Subnet mask
Default gateway
Login user name
Login password
• DHCP - Choose to enable or disable the DHCP function. If enabled,
the display will be assigned IP address, Subnet mask and Default
gateway automatically. If disabled, you will be prompted to enter
the following values manually. When finished, press [SET] button to
store and save the chosen values.
• IP address
• Subnet mask
• Default gateway
• Login user name (The default user name is {admin})
• Login password (The default password is {0000})
Configuration reset
Reset all settings in Configuration1 menu to the factory preset values.
Factory reset
Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP},
{Configuration1}, {Configuration2}, and {Advanced option} to the
factory preset values.
Press [ ] or [ ] button to select [Reset], and then press [SET] button
to do the reset.
Factory reset
Cancel

4.2.6. Configuration2 menu

OSD turn off
Picture
Information OSD
Screen
Off timer
OSD H-position
Audio
OSD V-position
PIP
Monitor information
Configuration1
Configuration2
Advanced option
9 0 Z L
Disable
172 - 16 - 0 - 1
255 - 255 - 0 - 0
0 - 0 - 0 - 0
a d m i n
0 0 0 0
[ SET ]
change [SET] in STORE
Reset
OSD turn off
Set the period of time the OSD (on-screen display) menu stays on the
screen.
The options are: {5 ~ 120} seconds.
Information OSD
Set the period of time the information OSD is displayed on the upper
right corner of the screen. The information OSD will display when input
signal is changed.
The information OSD will remain on the screen with {Off} selection.
The options are: {1 ~ 60} seconds.
Off Timer
Set the display to turn itself off to standby mode within an amount of
time specified.
The options are: {Off, 1 ~ 24} hours from currrent time.
NOTE: W hen the "Off timer" is activated, the "Schedule" settings will
be disabled.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
Monitor information
Shows information about your display, including model number, serial
number, operating hours and software version.
Monitor information

4.2.7. Advanced option menu

Picture
Screen
Audio
PIP
Configuration1
Configuration2
Advanced option
Input resolution
Set the resolution of the VGA input. This is only required when the
display is unable to detect the VGA input resolution correctly.
NOTE: T his item is functional for VGA input only.
The options are:
• {1024x768 / 1280x768 / 1360x768 / 1366x768}
• {1400x1050 / 1680x1050}
• {1600x1200 / 1920x1200}
• {Auto}: Determines the resolution automatically.
22
Model name: BDL4252EL
Serial no:
Operation hours:
0 H 3M
SW Version:
VER 0.204
Input resolution
HDMI clock threshold
Black level expansion
Gamma selection
Scan mode
Scan conversion
Film mode
IR control
Keyboard control
Tiling
Heat status