In each Viewing Mode, Contrast, Brightness, Colour, Tint, Sharpness,
Temperature,
Vivid
Colour,
Reduction,
Intelligent Frame Creation
and stored.
When in
True Cinema
additionally. The settings in
each input.
You can set
Viewing Mode
●
Ambient Sensor
1. Display the menu with
2. Select
Picture
3. Select
On
/
Off
with
Ambient Sensor
(On
/ Off)
Automatic Brightness Control function
●
Adjusts picture settings automatically depending on ambient lighting
conditions.
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
Off Timer
is active.
●
Watching
No operation is performed for 4 hours while
●
Settings
No signal is received and no operation is performed for 10 minutes while
●
No signal Power off
Settings
= Note =
This function does not affect the recording of
●
Touch
Recording.
Aspect
Change the aspect ratio (image size) with ASPECT.
Enjoy viewing the image at its optimum size and aspect.
●
Ambient
Sensor,
and
or
Custom
mode,
True Cinema
in 2D and 3D mode for each.
MENU
Ambient Sensor
with
/
and press
Basic
Off Timer
Timer
Auto Standby
is set to On.
Timer
No signal Power off
- 28 -
Noise
Reduction,
24p Smooth Film
can be adjusted
Advanced Settings
can be adjusted
or
Custom
mode can be stored for
/
and press
OK
OK
to set
Auto Standby
Timer Programming
Colour
MPEG Noise
to access
is set to On.
and
One