3D Settings - Panasonic TH-P50ST60A Quick Manual

Items of 3D Mode Selection
●
3D / 2D:
Displays the appropriate image as you desire without selecting 3D format.
This mode may not work properly depending on the source image
●
format. In this case, select the appropriate 3D format manually.
■
To change 3D format manually
When the image is not changed properly using
manual setting.
1. Display the 3D Mode Selection (Manual)
above operation
2. Select the mode with
Original:
Displays the source image as it is.
Use to identify the format type of the source image.
●
Watching
Side by Side - 3D / Side by Side - 2D
- 2D:
Displays the mode you select.
Not valid in Analogue TV and AV mode
●
2D 3D:
Converts 2D images into 3D.
Please note the 3D images appear slightly different from the originals.
●
Using this function for profit-making purposes, or publically showing
●
images converted from 2D to 3D in places such as shops or hotels
etc. may infringe on the rights of the copyright holder protected under
copyright law.

3D Settings

1. Display the menu with
2. Select Picture
3. Select one of the following items with
3D Detection / 3D Signal Message
Adjustment / L/R Picture Swap
4. Set with / /
To exit the menu screen
●
vary depending on the condition.
/ and press
3D Source image format
/ Top and Bottom - 3D
MENU
3D Settings with
/
/ Edge Smoother
/ and press OK
- 41 -
3D / 2D mode, use this
screen with
OK to set
/ and press OK to access
/ and press OK
3D Refresh Rate / 2D 3D Depth
/ Safety Precautions
to store
(red) during
/ Top and Bottom
to access
/ 3D