1. Manuals
  2. Brands
  3. Valor Fires Manuals
  4. Electric Heater
  5. 845
  6. Installer and owner manual

Valor Fires 845 Installer And Owner Manual

Fitted with a lyrica fascia (gc no. ef-032-38)
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLER AND OWNER GUIDE
Model
ELECTRIC HEATER
Fitted with a
(GC No. EF-032-38)
This guide is intended to help you
install and care for your Valor Fires
electric heater. Please read carefully
before installing and using your
heater. However, if further
information is required, our
Valor Fires Technical Helpline will
be pleased to help.
Telephone 0844 8711 565 (National
call rates apply in the United
Kingdom).
In the Republic of Ireland
Telephone 0044 844 8711 565.
Important: Please keep your guide in a safe place for future reference.
©
Baxi Heating U.K. Limited 2008.
845
Lyrica
fascia.
5133751/ 01

Advertisement

Table of Contents
loading

Related Manuals for Valor Fires 845

Summary of Contents for Valor Fires 845

  • Page 1 Lyrica Fitted with a fascia. (GC No. EF-032-38) This guide is intended to help you install and care for your Valor Fires electric heater. Please read carefully before installing and using your heater. However, if further information is required, our Valor Fires Technical Helpline will be pleased to help.
  • Page 2 the nation’s favourite PLUMBING & HEATING SUPPLIES FREE SHIPPING SECURE PAYMENTS on all orders over £100 to mainland UK shop online with confidence FINANCE AVAILABLE PRICE MATCH spread the cost with low interest rates always get the best deals available we have H U G E R E D U C T I O N S...
  • Page 3 Warning: Any person who does any unauthorised act in relation to a copyright work may be liable to criminal prosecution and civil claims for damages. Valor Fires, Erdington, Birmingham B24 9QP. www.firesandstoves.co.uk Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication ©...

  • Page 4: Customer Care

    INSTALLER AND OWNER GUIDE Safety First. Valor Fires heaters are CE Approved and designed to meet the appropriate British Standards and Safety Marks. Quality and Excellence. All Valor Fires heaters are manufactured to the highest standards of quality and excellence and are manufactured under a BS EN ISO 9001 quality system accepted by the British Standards Institute.

  • Page 5: Handling And Unpacking

    * Although the heater is supplied with a spacer frame, an optional spacer frame kit is obtainable either from your heater supplier or direct from Valor Fires Sales. The kit is a 71mm spacer kit (Kit number 0584081). This spacer when added to the one supplied with the heater enables the heater to be flat wall fixed.
  • Page 6 The electric supply must be safely routed from the heater to an electrical socket. If the electric cable is damaged, to avoid a hazard it must be replaced by a Valor Fires authorised service agent, or similarly qualified person. All external wiring between the heater and the electrical supply shall comply with current IEE regulations.

  • Page 7: Optional Kit

    INSTALLER AND OWNER GUIDE 3. OPTIONAL KIT The following kit is obtainable either from your heater supplier or direct from Valor Fires Sales. Spacer frame kit 0584081 Contents Quantity (Illustrations are not to scale) Spacer frame No 8 x 3/8 Self- tapping screws 4.
  • Page 8 INSTALLER AND OWNER GUIDE What opening size do you need in the surround or fireplace opening? This heater can be fitted into fireplaces or surrounds where the following dimensions are available. Width 395mm - 450 mm Height 555mm - 590 mm Depth At least 145mm Do you want to fit the heater into a surround using the spacer frame...
  • Page 9 INSTALLER AND OWNER GUIDE Securing the heater. The contents have been identified in figure 2 (Fascias are not included). Contents Quantity (Illustrations are not to scale) Heater Spacer frame No. 8 x 3/8 pan head screw Tension wire Screweye Woodscrew Wall plug Cable clamp Figure 2.
  • Page 10 INSTALLER AND OWNER GUIDE The heater must be secured into position to prevent it from being tipped over. The following securing options are available: Method A - Securing the heater with Screws. Method B - Securing the heater with Wire. Method C - Securing the heater using the Spacer Frame supplied with the heater.
  • Page 11 INSTALLER AND OWNER GUIDE Method B - Securing with wire. This method of securing is recommended where the wall / brickwork is in poor condition or where marble back panels / surrounds are used. Although this section deals with fireplace openings without a spacer, this method of securing the heater can also be used with the spacer frame supplied with the heater (See point 7 and figure 7 of method C).
  • Page 12 INSTALLER AND OWNER GUIDE small hole on the left hand side of the heater (See figure 5). 11. Locate the heater in the fireplace opening, then from the front of the heater, gently pull the steel wire on the right hand side to gather up the excess until the heater is secure.
  • Page 13 INSTALLER AND OWNER GUIDE Method D - Securing with the optional spacer frame supplied in kit 0584081. The optional spacer is for use where a flat wall installation is required. 1. There are four screws supplied with the optional spacer frame. The narrow flange of the optional spacer should be placed against the spacer supplied with the heater.

  • Page 14: Fitting The Fascia

    INSTALLER AND OWNER GUIDE 5. FITTING THE FASCIA Important: Before fitting the fascia ensure that you have completed the information on the last page of this guide. Fitting the fascia. 1. Remove the fascia from its packaging. 2. There are two magnets on the fascia (See figure 9).

  • Page 15: Cleaning And Maintaining The Heater

    INSTALLER AND OWNER GUIDE 7. CLEANING AND MAINTAINING THE HEATER Important Safety. Before undertaking maintenance always disconnect the heater from the electricity supply by removing the 3 pin plug and allowing the heater to cool. How do I Clean my heater? The heater and plastic parts need only to be wiped clean with a dry soft cloth;...

  • Page 16: Warranty And Service

    INSTALLER AND OWNER GUIDE 8. ENVIRONMENT Environmental Protection. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. What should I do when I’m ready to dispose of my heater? The plug should be removed from the mains cable and the mains cable cut from the heater.
  • Page 17 INSTALLER AND OWNER GUIDE When calling heateam, it would be helpful if you could have the following information to hand:- Heater serial number Heater brand and model number Date of installation Proof of purchase (If you do not have the heater serial number) Note: details 1 –...
  • Page 18 INSTALLER AND OWNER GUIDE © Baxi Heating U.K. Limited 2008. Page 17...
  • Page 19 INSTALLER AND OWNER GUIDE © Baxi Heating U.K. Limited 2008. Page 18...
  • Page 20 INSTALLER AND OWNER GUIDE To be completed by the customer: Model Serial number (Can be found on the information label - See figure 10) A LABEL CONTAINING THE SERIAL NUMBER MAY HAVE BEEN PLACED INSIDE THIS BOX. Fascia name (Block Capitals) Fascia code - Can be found close to the information label (Block Capitals) A LABEL CONTAINING THE FASCIA...
  • Page 21 © Baxi Heating U.K. Limited 2008.

Table of Contents