Differential Pressure Monitor Owner's Manual
Operating and Power Specifications
Operating temperature
Operating range
Power consumption
Pressure Signal Output Definition and Specification
The pressure signal output is a digital pulse signal that represents the measured pressure
difference across the sensor.
Operating Range
Recommended Wire
Recommended max.
wire length
6
PIN #1
PIN #1
Figure 3. RPT Circuit Board.
65° to 85°F (18.3° to 29.5°C)
24 Vac, 50/60 Hz
1.4 VA, Class 2, at 24 Vac
0-5 volt rectangular wave, 0-10 KHz
2 Conductor, 18 AWG Shielded Cable.
500 ft (152.4 m)
+
-
24V TRUNK
1 2 3
+
-
TO DPM
PRESSURE SIGNAL
Siemens Building Technologies, Inc.