Naming A Song (Song Name); Protecting A Song (Song Protect) - Boss BR-80 Owner's Manual

Managing Your Songs (SONG)
Naming a Song
(SONG NAME)
When you create a new song, it will
automatically be given a name such as
"SONG0001. " When you've finished a song,
you should give it an appropriate name
so that your song data will be easier to
manage.
1.
Access the "SONG INFO" screen (p . 85) .
2.
Use the cursor [
move the cursor to "INFO," and press
the [ENTER] button .
The SONG INFO screen will appear.
3.
Use the cursor [
move the cursor to the character that
you want to edit .
4.
Turn the dial to select the desired
character .
Press the cursor [
character at the selected location.
Press the cursor [
selected character.
5.
Press the [ENTER] button .
A message will ask "Are you sure?"
If you decide to cancel the procedure, press
the [EXIT] button.
6.
Press the [ENTER] button .
The name will be changed.
* While the data is being updated, the
display will indicate "Keep power on!"
Do not turn off the power while this
message is shown.
86
] [ ] buttons to
] [ ] buttons to
] button to insert one
] button to delete the
Protecting a Song
(SONG PROTECT)
You can protect the song data from being
rewritten (Song Protect).
If Song Protect is enabled, the following
operations cannot be performed.
• Recording
• Track editing
• Changing the song name
• Changing the MASTER LEVEL
• Changing the KEY
• Song erase
• Rhythm editing
• Writing to the song effect patches
• Song optimize
1.
Access the "SONG INFO" screen (p . 85) .
2.
Use the cursor [
move the cursor to "PROTECT . "
3.
Use the dial to select the "ON" setting .
] [ ] buttons to