Recording; Recording With The Metronome - Boss BR-80 Owner's Manual

Recording/Playback

Recording

Rewind
Fast-forward
Pause
1.
Press the [ ] (REC) button to enter
recording-standby mode .
The [ ] (REC) button will blink.
2.
Use the [REC LEVEL] dial to adjust the
recording level .
Adjust the loudness of the sound you're
recording (p. 49).
3.
Press the [ ] (REC) button to start
recording .
The [ ] (REC) button will light, and
recording will begin.
NOTE
• The recording level will change if you
operate the [REC LEVEL] dial during
recording.
Take care not to operate the [REC LEVEL]
dial inadvertently.
• You can't turn off the power during
recording. You must stop recording
before you can turn off the power.
46
Record /
Recording-standby
Play
4.
Press the [ ] (STOP) button to stop
recording .
The [ ] (REC) button will go out.
The display will show the file that was
recorded.
MEMO
A song name such as LIVE0001.WAV will
be created automatically.
The 0001 portion will be the number
following the highest-numbered song
that exists.
Recording with the
Metronome
If you use the metronome while recording,
it will be easier to record at an accurate
tempo.
1.
Press the [RHYTHM] button .
The metronome will turn on.
2.
Use the cursor buttons to select the
desired parameter, and use the dial
to specify its value .
Parameter Explanation
BEAT Specifies the time signature.
TEMPO Specifies the tempo.
Specifies the volume of the
LEVEL
metronome.
ON: The metronome will be
recorded with the performance.
REC
OFF: You'll hear the metronome,
but it will not be recorded.
In the metronome setting screen, you
can press the [ENTER] button to turn the
metronome on/off.