Heat & Glo GRL-700-AU Installation And Operation Instructions Manual page 10

STEP 3: LOG #1 (SRV506-701)
Put log #1 behind the locating tab on the right rear corner and up against the locating tab in the center.
STEP 4: LOG #2 (SRV2010-703)
Place log #2 on the right front corner of the unit using its locating slots (on log bottom).
3
STEP 5: LOG #3 (SRV506-717)
Place log #3 against the left front corner of log #2 as shown.
1
2
8
1
3
2