Garmin GDU 37X Pilot's Manual page 77

pressing the Direct-to Key from the Waypoint Page.
The Waypoint Page allows the pilot to review airport information, runway
information, frequencies, instrument procedures, AOPA information, and weather
information. The pilot can manually enter the identifier or the GDU 37X will choose
the most appropriate identifier based on the current position and phase of flight.
The following descriptions and abbreviations are used:
• Usage type: Public, Military, or Private
• Runway surface type: Hard, Turf, Sealed, Gravel, Dirt, Soft, Unknown, or Water
• Runway lighting type: No Lights, Part Time, Full Time, Unknown, or PCL Freq (for
pilot-controlled lighting)
• COM Availability: TX (transmit only), RX (receive only), PT (part time), * (additional
information available)
Selecting an airport for review by identifier, facility name, or loca-
tion:
1) From the Waypoint (WPT) Page, press the INFO Softkey.
2) Press the FMS Joystick to activate the cursor.
3) Turn the FMS Joystick clockwise to begin entering a waypoint identifier
(turning it counter-clockwise brings up the waypoint selection submenu -
press the CLR Key to remove it), or move the FMS Joystick to select the
facility name, or city field.
4) Press the ENT Key.
190-01054-00 Rev. E Garmin GDU 37X Pilot's Guide
™
GPS Navigation
59