Map Panning - Garmin GDU 37X Pilot's Manual

GPS Navigation
When the selected range exceeds the resolution of the map data, 'overzoom' appears
below the map range scale.
Enabling/disabling autozoom:
1) With the Map Page displayed, press the MENU Key.
2) Turn or move the FMS Joystick to highlight 'Set Up Map' and press the
ENT Key.
3) Turn the FMS Joystick to highlight the 'General' Menu.
4) Move the FMS Joystick to highlight the 'Autozoom' field.
5) Turn the FMS Joystick to access the 'On/Off' drop down list.
6) Turn or move the FMS Joystick to highlight the desired option, and press
the ENT Key.

MAP PANNING

Map panning allows the pilot to:
• View parts of the map outside the displayed range without adjusting the map
range
• Highlight and select locations on the map
• Review information for a selected airport, NAVAID, or user waypoint
• Designate locations for use in flight planning
• View airspace and airway information
When the panning function is selected by pressing the FMS Joystick (PAN MAP
Softkey on the Weather Page) the Map Pointer flashes on the map display. A window
also appears at the top of the map display showing the latitude/longitude position of
the pointer, the bearing and distance to the pointer from the aircraft's present position,
the elevation of the land at the position of the pointer, or the object's (airports,
obstacles, etc) elevation, if known.
46
Map Range/Overzoom
Garmin GDU 37X Pilot's Guide
™
Scale Bar Rep-
resenting a Map
Scale of 1.2
nm Per Scale
Width.
190-01054-00 Rev. E