Garmin GDU 37X Pilot's Manual page 178

Hazard Avoidance
FLIGHT ID DISPLAY AND GROUND TRACK
The Flight IDs of other aircraft (when available) can be enabled for display on
the Traffic Page. When a flight ID is received, it will appear above or below the
corresponding traffic symbol on the Traffic Page when this option is enabled. Traffic
ground track is indicated on the GDU 37X display by a "target track vector," a short
line shown in 45-degree increments, extending in the direction of target movement.
Enabling/Disabling Flight ID Display:
On the Traffic Page, press the FLT ID Softkey.
Aircraft
Identification (tail
number or Flight
ID number)
Intruder Aircraft
Ground Track
Changing the altitude range:
1) On the Traffic Page, select the ALT MODE Softkey.
2) Press one of the following Softkeys:
• ABOVE: Displays non-threat and proximity traffic from 9000 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
climb phase of flight.
• NORMAL: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
enroute phase of flight.
• BELOW: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 9000 feet below the aircraft. Typically used during
descent phase of flight.
• UNREST (unrestricted): All traffic is displayed.
3) To return to the Traffic Page, press the BACK Softkey.
160
Example ADS-B Traffic Symbol
Garmin GDU 37X Pilot's Guide
™
Relative Altitude (in
this case 500 feet
above own aircraft)
Altitude Trend (up
arrow indicates
climbing, down
arrow indicates
descending)
190-01054-00 Rev. E