Related Manuals for Fujitsu Siemens Computers D1570
Summary of Contents for Fujitsu Siemens Computers D1570
- Page 1 Technisches Handbuch / Technical Manual Systembaugruppe / System Board D1570 Deutsch / English...
- Page 2 Ihre Verkaufsstelle Weitere Informationen finden Sie im Handbuch "Sicherheit" und "Ergonomie". Aktuelle Informationen und Updates (z. B. BIOS-Update) zu unseren Systembaugruppen finden Sie im Internet: http://www.fujitsu-siemens.com/mainboards Are there ..any technical problems or other questions you need clarified? Please contact:...
- Page 4 Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1570-Z120-1-7419 Printed in the Federal Republic of Germany AG 0703...
- Page 5 Deutsch English Systembaugruppe / System Board D1570 Technisches Handbuch Technical Manual Ausgabe Dezember 2003 December 2003 edition...
- Page 6 Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Inhaber und werden als geschützt anerkannt. Copyright ã Fujitsu Siemens Computers GmbH 2003 Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
-
Page 7: Table Of Contents
Front USB Device Wake Up - JP 9 ....................9 Rear USB Device Wake Up - JP 10...................9 Recovery: System-BIOS recovery - JP 37 ................10 Add-on modules ..........................11 Slot sequence..........................11 Installing processor with heat sink ...................12 Upgrading main memory......................14 Replacing lithium battery......................16 Glossary ............................17 A26361-D1570-Z120-2-7419... -
Page 9: Introduction
Introduction This technical manual describes the system board D1570. You will find further information in the "BIOS Setup" description. Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD. -
Page 10: Information About Boards
The equipment and tools you use must be free of static charges. Remove the power plug from the mains supply before inserting or removing boards containing ESDs. Always hold boards with ESDs by their edges. Never touch pins or conductors on boards fitted with ESDs. 2 - English A26361-D1570-Z120-2-7419... -
Page 11: Features
PS/2 keyboard port 4 = VGA port A = Slot for low-profile/half-length 5 = Identification display B = Slot for full-height/ full-length 6 = Global error indicator C = Slot for half-height/half-length 7 = LAN port B English - 3 A26361-D1570-Z120-2-7419... -
Page 12: Internal Ports And Connectors
16 = Jumper JP 8 7 = USB ports 17 = Jumper JP 2 8 = Keyboard and mouse port 18 = Serial port COM2 9 = Jumper JP 10 19 = VCC_RSB (Remote Service Board) 10 = IPMB port 4 - English A26361-D1570-Z120-2-7419... -
Page 13: Temperature / System Monitoring
In addition, any unnecessary noise is also prevented by reducing the fan speed, and information is provided about the system status. Cover monitoring protects the system from unauthorised opening. The temperature and system monitoring are controlled by an controller developed by Fujitsu Siemens. The following functions are supported:... -
Page 14: Lan Connector
"IRQ" = interrupt assigned as shipped "Address" = this address can be used for your particular device "Address" = this DMA can be used for your particular device Default settings are shown in bold print. 6 - English A26361-D1570-Z120-2-7419... -
Page 15: Pci Bus Resources
3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15 The selected ISA interrupt is assigned to the PCI interrupt. You may not select an ISA interrupt that is used by a component on the system board (e.g. controller) or an ISA board. English - 7 A26361-D1570-Z120-2-7419... -
Page 16: Screen Resolution
Screen resolution Refresh rate (Hz) Max. number of colours 640x480 16.7 mio. 800x600 16.7 mio. 1024x768 16.7 mio. 1152x864 16.7 mio. 1280x1024 16.7 mio. 1600x1200 16.7 mio. Shaded screen resolutions are not supported by LCD monitors (TFT). 8 - English A26361-D1570-Z120-2-7419... -
Page 17: Jumper Settings
Rear USB Device Wake Up - JP 10 The jumer JP 10 allows the selecttion to enable or disable the USB wake-up. The rear USB device wake-up is disabled (default setting). The rear USB device wake-up is enabled. English - 9 A26361-D1570-Z120-2-7419... -
Page 18: Recovery: System-Bios Recovery - Jp 37
The system boots from the "Flash BIOS floppy disk" from Drive A and reprograms the system BIOS on the system board. The System is started with the system BIOS from the system board (default setting). 10 - English A26361-D1570-Z120-2-7419... -
Page 19: Add-On Modules
The PCI slots 1-2 are supplied with 3.3 V main voltage Slot sequence A 5 V PCI card can only be mounted with a special riser card. An RSB can only be mounted with a special riser card. English - 11 A26361-D1570-Z120-2-7419... -
Page 20: Installing Processor With Heat Sink
It is essential to use heat conducting paste between the processor and the heat sink. If you remove the heat sink, you must clean it (e.g. with benzine) and apply new heat conducting paste before you remount it. Only use the supplied heat sink and the supplied retaining clamps. 12 - English A26361-D1570-Z120-2-7419... - Page 21 First hook in the retaining clamps on one side Ê and then press them firmly. Removing retaining clamps: Use a screwdriver to lever into the nodge a, Ê press down on the clamp so that you can take off the retaining clamps upward. English - 13 A26361-D1570-Z120-2-7419...
-
Page 22: Upgrading Main Memory
(DIMM5/6), then bank 1 (DIMM3/4), then bank 0 (DIMM1/2). bank 2 CPU 1 bank 1 bank 0 CPU 2 When single rank (S) and dual rank (D) memory modules are mixed, only the following sequences are allowed: DIMM5/6 DIMM3/4 DIMM1/2 empty 14 - English A26361-D1570-Z120-2-7419... - Page 23 At the same time flip the both lateral holders upwards until the memory module snaps in Ê place (2). Removing a memory module Push the clips on the right and left of the memory slot outward (1). Ê Pull the memory module out of the memory slot (2). Ê English - 15 A26361-D1570-Z120-2-7419...
-
Page 24: Replacing Lithium Battery
Press the locking lug in the direction of the arrow (1); the battery jumps somewhat out of the Ê holder (2). Remove the battery (2). Ê Insert a new lithium battery of the same type under the holder (3) and press it into the socket Ê (4). 16 - English A26361-D1570-Z120-2-7419... -
Page 25: Glossary
System Management Bus Graphics Performance SVGA Super Video Graphic Adapter Accelerator Inter Integrated Circuit Universal Serial Bus IAPC Instantly Available Power Video Graphic Adapter Managed Desktop PC Design I/O Controller Hub Wake On LAN Intelligent Drive Electronics English - 17 A26361-D1570-Z120-2-7419... - Page 26 Information on this document On April 1, 2009, Fujitsu became the sole owner of Fujitsu Siemens Compu- ters. This new subsidiary of Fujitsu has been renamed Fujitsu Technology So- lutions. This document from the document archive refers to a product version which was released a considerable time ago or which is no longer marketed.