Operation - Hunter Universal Fan and Light Remote Control Owner's Manual And Installation Manual

Light Operation:
• Turn ON wall switch. The light will turn ON at maximum brightness.
• Press and quickly release either light button on the hand held remote to turn the light OFF or ON.
• After a power outage, the light will turn ON when power is restored. Press and quickly release one of
the light buttons once to turn the light back OFF after a power outage.
• Press and hold either light button for more than 1 second to activate the dimming cycle.
• Press to turn the light ON at the maximum level and continue holding down to dim the
light.
• Press to turn the light ON at a low level and continue holding down to brighten the light.
• Continue to hold the light button to repeat the cycle.
• Release the light button when the desired light level is reached.
To turn the light OFF:
• Press both of the light buttons
the transmitter will blink 4 times to let you know it's starting to turn the light off. The light will
slowly dim down until it's completely off within 30 seconds. This "Safe Exit" feature provides
you with enough light to leave the room safely.
• To turn the light off instantly, press and quickly release either light button
• When the light is turned on again, it will "remember" the brightness level it was at before it
was turned off and resume at that level again.
6 • Operation
& together to begin "Safe Exit Mode." The LED light on
44092-01 • 12/15/10 • Hunter Fan Company
or once.
Down
Dimmer
9
*Press both of
the light buttons
& together
to begin "Safe
Exit Mode." The
LED light on
the transmitter
will blink 4
times to let you
know it's start-
ing to turn the
light off. The
light will slowly
dim down until
it's completely
off.
Up
Dimmer