Hunter TYPE 5 Installation And Operation Manual
Hide thumbs
Also See for TYPE 5:
- Owner's manual and installation manual (19 pages) ,
- Owner's manual (16 pages) ,
- Installation and operation manual (12 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
installation and
operation manual
for Hunter
Ceiling Fans
TYPE 5 Models
42759-01 • 11/28/07
Advertisement
Table of Contents
Related Manuals for Hunter TYPE 5
Summary of Contents for Hunter TYPE 5
- Page 1 For Your Records and Warranty Assistance Ceiling Fans Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ TYPE 5 Models For reference also attach your receipt or a copy of your receipt to the manual. 42759-01 • 11/28/07...
-
Page 2: Table Of Contents
Ceiling Fan ......11 use a solid-state speed control with this fan. Use only Hunter speed 9 • Troubleshooting ....12 controls. © 2007 Hunter Fan Company 42759-01 • 11/28/07 • Hunter Fan Company... - Page 3 Installer’s Choice and Optional Accessories Understanding Mounting and Installer’ s Choice® Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods. Standard Outlet Box Mounting Considering Optional Accessories Style Consider using Hunter’s optional accessories, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product.
-
Page 4: Getting Ready
To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magnetic tip recommended) -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 3” Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 42759-01 • 11/28/07 • Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
Securely retighten the set screw with a wrench or pliers. CAUTION: The adapter has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from Step 3-4 unscrewing. Once assembled, do not remove the downrod. U-shaped Hole 3-4. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim. 42759-01 • 11/28/07 • Hunter Fan Company... -
Page 7: Wiring The Fan
4-6. Turn the splices upward and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42759-01 • 11/28/07 • Hunter Fan Company... -
Page 8: Installing The Canopy And Canopy
1. Locate the tab indicators, small bumps on top of tabs. 2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. Step 5-3 Steps 5-4 – 5-5 Canopy Screw 42759-01 • 11/28/07 • Hunter Fan Company... -
Page 9: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Remove the blade mounting screws and rubber shipping bumpers from the motor. Note: Some blade mounting screws are installed in the motor to secure shipping blocks. 6-2. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. -
Page 10: Installing The Switch Housing
Incorrect connection could cause improper operation and damage to the product. 7-6. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch Plug Connector housing with three housing assembly screws. Note: You can customize your Hunter fan with a number of accessory light kits. Steps 7-5 – 7-6 Lower Switch Housing Housing Assembly Screw 42759-01 • 11/28/07 • Hunter Fan Company... -
Page 11: Operating And Cleaning Your
8-5. Clean wood finish blades with a furniture polishing cloth. Occasionally, apply a light coat of furniture polish for added protection and beauty. Clean painted and high-gloss blades in the same manner as the fan finish. In cold weather, use upward air flow pattern 42759-01 • 11/28/07 • Hunter Fan Company... -
Page 12: Troubleshooting
2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 42759-01 • 11/28/07 • Hunter Fan Company...
Need help?
Do you have a question about the TYPE 5 and is the answer not in the manual?
Questions and answers