Table of Contents
Advertisement
Quick Links
Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE
USE. Record the following information for quick reference.
Attach copy of sales receipt.
Date Purchased: ______________________________ Model Number: __________ - _______ Color _______________________________________________
Parts List
Make sure you have all the parts listed below before using your Walker. If any parts are missing,
call Customer Service at 1-800-992-6624.
Seat back
Nut (X4)
Fixed
Wheel (X2)
Swivel
Wheel (X2)
Side
Mirror (X2)
Support
Legs (X4)
Base
Seat Pad
Traffic Signal
Toy
Toy Tray
Stabilizer
Upper Tray
Name of Parts
Combi USA, Inc. • 3520 Westinghouse Blvd., Suite B • Charlotte, NC 28273 • CombiUSA.com
Rock N Roll Walker
Instruction Manual
Customer Service 1-800-992-6624
Note: Illustrations are only representative and not actual.
Tools Needed: Screwdriver
1 Seat
2 Side Mirror
3 Toy Tray
4 Upper Tray
5 Support Legs
7 Stabilizer Pad
8 Wheels
9 Base
10 Height Button
Advertisement
Table of Contents
Related Manuals for Combi Rock N Roll Walker
Summary of Contents for Combi Rock N Roll Walker
-
Page 1: Parts List
2 Side Mirror 3 Toy Tray 4 Upper Tray 5 Support Legs 6 Rocker 7 Stabilizer Pad 8 Wheels 9 Base 10 Height Button Combi USA, Inc. • 3520 Westinghouse Blvd., Suite B • Charlotte, NC 28273 • CombiUSA.com Customer Service 1-800-992-6624... - Page 2 Combi® reserves the right to modify the products in its line during the course of the year. Non contractual media. Colors are as accurate as the media in which they appear allows. ©Combi USA, Inc. 2011 - 2 -...
- Page 3 Assembly Instructions 1. Place Upper Tray on a flat surface. Attach seat back by inserting front tabs on seat back into slots on upper tray (figure 1). figure 1 2. Lower seat back to insert rear tabs into rear slots on upper tray (figure 2). Push seat back down firmly to fully attach seat back.
- Page 4 Assembly Instructions (continued) 5. Attach seat cover sides by inserting each of the six (6) attachment tabs into the slots on the side of the seat area (figure 5). Push tab into slot, then pull from the bottom and flip tab to secure. figure 5 6.
- Page 5 Assembly Instructions (continued) 14. To securely attach each leg to the base, press the button in the center of the tire, while pushing down firmly on the leg (figure 10). The leg will click into position. Repeat for all four (4) legs. figure 10 15.
- Page 6 Assembly Instructions (continued) 20. Turn toy tray over to access bottom side. Unscrew and remove the battery cover (figure 14). Insert two (2) "AA" batteries (figure 15). Replace battery cover and tighten the screw to secure the cover. To turn toy unit on, switch the On/Off switch to "On"...
- Page 7 3-in-1 Activity Center Stage 1: Stationary Activity Center 1. To engage the stabilizer pad, turn stabilizer knob clockwise until it stops (figure 1). 2. Lift wheel stabilizer on rear wheels upward to secure the wheels. (figure 2). NOTE: To remove from Stationary Activity Center stage, reverse the instructions above.
- Page 8 - Replace with a new battery, if necessary. Routine Maintenance STORE IN A COOL AND DRY AREA, especially in the summer. Do not store the Rock N Roll Walker in the trunk of a vehicle. ALWAYS MAKE SURE FRICTION PADS ARE KEPT CLEAN , CLEAN WITH WATER ONLY.
Need help?
Do you have a question about the Rock N Roll Walker and is the answer not in the manual?
Questions and answers