Sansui WLD+201L User Manual page 45

Buttons do not function (on the WLD+201
and/or remote control)
Network connection is not possible
Any repairs other than those mentioned above are to be carried out solely by an authorised technician.
Turn the WLD+201 off and then on again.
-
As an alternative, turn the WLD+201 off, unplug it from the
-
power outlet and plug in again.
The network is not available at the moment. Try again later.
-
- The router restricts access to the listed MAC address of the
unit. You can manually change this setting to allow the
WLD+201 to be recognised by your router. You will need to
obtain the MAC address of your WLD+201. You can find it
by choosing MENU › System settings › View settings
The WLD+201 may be too far from the wireless router.
-
Check the distance to the router and adjust accordingly.
Change the selected encryption method on the WLD+201.
-
- Use the menu of the WLD+201 to set up the system
manually.
Check that your firewall is not preventing access.
-
Check the network cable.
-
Page | 43
© Sansui UK 2012 WLD+201 IB Ver 1.0 Rev 0.0