Specifications; Control Basics; Power; Table 1. Dc Input Voltage Requirements - Planar EL640.480-AG1 Series User Manual

El640.480-ag1 series icebrite vga flat panel displays
Table of Contents

Advertisement

Specifications

Performance characteristics are guaranteed when measured at 25°C with rated
input voltage unless otherwise specified.

Control Basics

The EL panel is a matrix structure with column and row electrodes arranged in an
X-Y formation. Light is emitted when an AC voltage of sufficient amplitude is
applied at a row-column intersection. The display operation is based on the
symmetric, line at a time data addressing scheme. Required operating voltages
are provided by an integrated DC/DC converter.

Power

The supply voltages required for the displays are shown in Table 1. All internal
high voltages are generated from display supply voltage (V
voltage (V
minimum and maximum specifications in this manual should be met, without
exception, to ensure the long-term reliability of the display. Planar does not
recommend operation of the display outside these specifications.

Table 1. DC Input Voltage Requirements.

Parameter
V
L
V
H
V
, max
H
I
, max
L
I
, max
H
Ptyp, 120 Hz
Pmax, 120 Hz
CAUTION: Damage to the device may occur beyond absolute maximum ratings.

Table 2. Video Input Requirements.

Description
Video logic high
voltage
Video logic low
voltage
Video logic input
current
There is no overcurrent protection on either the V H or V L inputs to protect
against catastrophic faults. Planar recommends the use of a series fuse on the 12
volt supply. A general guideline is to rate the fuse at 1.8 to 2 times the display
maximum current rating.
) should be present whenever video input signals or V
L
AG1
+5 V ±5%
+12 V ±10%
15 V
75 mA
1.0 A
6.5 W
12.0 W
AG1 (CMOS)
Min
Max
3.7
5.0
0
0.9
±10
EL640.480 AG1 Series User's Manual (020-0350-00B)
AG1 ET
+5 V ±5%
absolute max 6.0 V
+8 to +18 V
19 V
0.1 A
@ V
= +5 V
L
1.0 A
@ V
= +12 V
H
6.5 W
3840 'E' characters
12.0 W
50/50 2x2 checkerboard
AG1 ET (TTL)
Min
Max
Units
2.0
V
+ 0.5
V
L
-0.5
0.8
V
±10 (-300)
µA
). The logic supply
H
is applied. The
H
Notes
Notes
Video lines have 100 Ω
series resistors, AG1 ET
has internal pull-up in
S input.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

El640.480-ag1 et lpEl640.480-ag1 neEl640.480-ag1 et cc

Table of Contents