Sony Ericsson T630 User Manual page 5

2. Here, the user needs to create two separate accounts, a GPRS account and a GSM account.
a. To create a GPRS account called Telstra.gprs:
i. Select New account and press Add key if necessary.
ii. In the Account type menu, GPRS data.
iii. In the New account window, enter account name: Telstra.gprs.
iv. Under New GPRS data enter the following:
1. APN: telstra.wap.mnc001.mcc505.gprs, press OK button.
2. User ID: (leave blank).
3. Password: (leave blank).
4. Press Save button.
STEP B: The Browser & Proxy settings.
1. From the idle screen (to get back to the idle screen, keep pressing the back button) move the joystick right to enter
main menu.
a. Press * key or select Connectivity icon from the main menu (bottom left).
b. Press 4 or select WAP options from the list.
c. Press 1 or select WAP profiles from the list.
2. Select New profile and press Add key if necessary.
a. Under New profile enter the following:
i. Name: (any name) press OK button.
ii. Select Connect using and select Telstra.gprs.
iii. Select IP address and enter 10.1.1.150 and press OK.
iv. Press Save button, the phone will display a new profile was created and return to the WAP profiles menu.
b. Select the profile created above eg: (any name)
i. Press the Edit button.
ii. Press 4 or select Advanced.
iii. Press 1 or select Change homepage.
1. Under Change homepage enter Name: DEFAULT_HOMEPAGE, press OK.
2. Enter address: eg. http://wap.mdata.net.au/home, press OK.
i. Press back button to return to Telstra WAP profile.
3. The following settings were previously set or are left on default (you may skip this):
a. IP Address: 10.1.1.150.
b. Security: On or off; on will enable security (recommended).
c. Advanced.
i. <User ID> (blank).
ii. <Password> (blank).
5