Connecting The Power Cord - Roland Modela MDX-40 User Manual

Connecting the Power Cord

Do not use with any electrical power supply that does not meet the ratings dis-
WARNING
played on the unit.
Use with any other power supply may lead to fire or electrocution.
WARNING Ground the unit with the ground wire.
Failure to do so may result in risk of electrocution in the event of a mechanical problem.
CAUTION Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Machine
Connecting/disconnecting
the cord
Be sure to turn off the machine be-
fore connecting/disconnecting the
power cord. Also, be sure to con-
nect the cables securely so that they
will not accidentally disconnect
while the machine is operating.
Important Notes on the Power Cord
Never damage the power cord or pull it with force.
WARNING
Doing so may tear the cord's insulation, causing an electrical short and resulting in electri-
cal shock, electrocution, or fire.
WARNING Never place any object on the power cord, bend the power cord using excessive
force, or allow the power cord to become deformed.
If it becomes deformed, the deformed location may grow hot and cause fire.
Never use the machine with the power cord bound into a bundle or roll.
WARNING
If the cord is in a bundle or roll, it may grow hot and cause fire.
Never use any power cord other than the power cord included with the machine.
WARNING
Also, never use a power strip or extension cord.
The power strip or extension cord may grow hot and cause fire.
WARNING Do not use with a damaged power cord or plug, or with a loose electrical outlet.
Doing so may lead to fire, electrical shock, or electrocution.
2-2 Installation
Power outlet
Power cord
Chapter 2 Preparation 25