Important Notes On Handling And Use - Roland Modela MDX-40 User Manual

Important Notes on Handling and Use

This machine is a precision device. To ensure the full performance of this machine, be sure to
observe the following important points. Failure to observe these may not only result in loss of
performance, but may also cause malfunction or breakdown.
This Machine Is a Precision Device
Handle carefully, and never subject the machine to impact or excessive force.
Never needlessly insert your hand or fingers inside the mechanical areas, including the areas inside the spindle
and under the table.
Install in a Suitable Location
Install in a location having the specified temperature and relative humidity.
Install in a quiet, stable location offering good operating conditions.
The tip of the tool is breakable
Handle with care, being careful not to drop it.
Clean carefully.
Excessive buildup of cuttings may impede correct operation and cause malfunction.
This machine becomes hot.
Never cover or block the ventilation holes with cloth, tape, or any other material.
Install in a well-ventilated location.
This machine is suited to cutting resins.
Never use it to cut metal.
13