Safety Precautions; Screen Examples In This Manual - Fujitsu fi-5950 Getting Started

Screen Examples In This Manual

The screen examples in this manual are subject to
change without notice in the interest of product
improvement. If the actual displayed screen
differs from the screen examples in this manual,
operate by following the actual displayed screen
while referring to the User's Manual of the scanner
application you are using.
The screenshots in this manual were captured
from TWAIN driver scanner driver, ScandAll
PRO Image Capturing Utility Software, ISIS
driver and Adobe
The Operator Panel Language
Display
Apart from English, the operator panel can also
display French, German, Italian, Spanish, and
Chinese (Simplified). In this manual, the language
display of the operator panel is shown in English.

■ Safety Precautions

ARNI N G
Do not insert or drop any foreign objects
(water, liquids, small metal objects, etc.) into
the opening sections on the scanner.
If foreign objects get inside the scanner,
immediately disconnect the power cable from
the AC outlet.
Then, contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service
provider. Pay particular attention to this
warning in households where there are small
children.
If the scanner is damaged for any reason,
immediately disconnect the power cable from
the AC outlet. Then, contact your FUJITSU
scanner dealer or an authorized FUJITSU
scanner service provider.
® ®
Acrobat .
In the following situation, immediately
disconnect the power cable from the AC outlet.
Not doing so may cause a fire or electric shock.
•
Smoke or heat coming from the scanner is
detected.
•
Strange noise or smell is detected.
•
Foreign objects (water, liquids, small metal
objects, etc.) get inside the scanner.
•
Other problems which indicate a scanner
failure are detected.
Then, contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service
provider. Never try fixing such problems by
yourself. Doing so is dangerous.
Do not take apart or modify the scanner as
high-voltage components inside the scanner
are dangerous. PFU assumes no liability to any
damage caused by taking apart the scanner,
as doing so is not covered under the warranty.
The area around the part to which this warning
label is affixed can become very hot.
To avoid burns, never touch around the area
indicated by this label.
Firmly insert the power cable into the AC
outlet. Not doing so may cause a fire or electric
shock.
Use the scanner only at the indicated power
voltage and current. Do not connect to
multiplepower strips. Improper power voltage
or current might cause a fire or electric shock.
Use only power cables provided with the
scanner. Do not use any extension cords. Not
following these instructions may cause
abnormal heat or a fire. Do not also use the
power cable provided with the scanner for
other devices, since this might cause problems
such as an equipment failure, or an electric
shock.
Do not install in places that are damp or
subject to smoke, steam, or dust, as this may
cause a fire or electric shock.
v